Intel P4000RP Technical Product Specification - Page 181
RMM4 DMN LAN connection. There is a separate IP Source field for the Baseboard LAN
View all Intel P4000RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Intel® Server Board S1200V3RP BIOS Setup Interface When an Intel® RMM4 + DMN is installed, the options for Intel® RMM4 LAN Configuration will be visible. When IPv6 is Disabled, the IPv4 configuration fields will be visible and the IPv6 configuration fields will not be visible. When IPv6 is Enabled, the IPv4 fields will be grayed out and inactive, while the IPv6 Configuration fields will be visible. In either case, the Intel® RMM4 section IP Source or IPv6 Source will determine whether the IPv4 or IPv6 address fields are display-only or can be edited. Back to [BMC LAN Configuration Screen] - [Server Management Screen] - [Screen Map] 11. IP Source Option Values: Static Dynamic Help Text: Select RMM4 IP source: If [Static], IP parameters may be edited. If [Dynamic], these fields are display-only and IP address is acquired automatically (DHCP). Comments: This specifies the IP Source for IPv4 addressing for the Intel® RMM4 DMN LAN connection. There is a separate IP Source field for the Baseboard LAN configuration. When IPv4 addressing is used, the initial value for this field is acquired from the BMC, and its setting determines whether the other Intel® RMM4 DMN LAN IPv4 addressing fields are display-only (when Dynamic) or can be edited (when Static). When IPv6 addressing is enabled, this field is grayed out and inactive. Back to [BMC LAN Configuration Screen] - [Server Management Screen] - [Screen Map] 12. IP Address Option Values: [Entry Field 0.0.0.0, 0.0.0.0 is default] Help Text: View/Edit IP Address. Press to edit. Comments: This specifies the IPv4 Address for the Intel® RMM4 DMN LAN. There is a separate IPv4 Address field for the Baseboard LAN configuration. When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The setting of IP Source determines whether this field is display-only (when Dynamic) or can be edited (when Static). When IPv6 addressing is enabled, this field is grayed out and inactive. Revision 1.0 169