Invacare XLT Owners Manual - Page 19

SECTION 3-SAFETY INSPECTION ❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary. ❑ Inspect upholstery for rips or sagging. ❑ Clean upholstery with light detergent and water. ❑ Check that all labels are present and legible. Replace if necessary. ❑ Ensure that casters are free of debris. Inspect/Adjust Weekly ❑ Inspect parking brake ‐ Adjust brake shoes to front rim. Check for worn or missing shoes. Check for wax or oil on rim. ❑ Ensure cable anchor is attached securely to brake arm. ❑ Ensure internal stopping brakes engages easily. CAUTION As with any vehicle, the wheels/casters and tires should be checked periodically for cracks, flat spots and wear, and should be replaced. ❑ Ensure axle nuts are tight. Wheel should be centered in fork. Keep wheel bearings adjusted and keep spokes tight and wheel in proper alignment. ❑ Inspect rim and fork assembly for damage. ❑ Ensure axle nut and wheel mounting nuts are secure. ❑ Inspect wheels for excessive side movement or binding when lifted and spun. ❑ Inspect for flat spots, wear and proper inflation. ❑ Inspect chain/chain guard for damage, rust, tension and stretch. Adjust if necessary. Lubricate each link (3‐in‐1 oil or a quality bike lubricant). Check for damage or looseness. ❑ Adjust shifter/brake cables according to shifter/brake manufacturerʹs instructions (included with the handcycle). ❑ Inspect front fork. Keep tight and lubricate (All purpose grease). ❑ Inspect footrest mounting hardware is tight and footrest secure. ❑ Inspect footrest straps for wetness and/or damage. ❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary. ❑ Inspect upholstery for rips or sagging. ❑ Ensure that casters are free of debris. Part No 1114850 19 Recumbent Handcycle Series