Invacare XLT Owners Manual - Page 56

Adjusting Twenty-Seven Speed Cassette Chain

Get Invacare XLT PDF manuals and user guides View all Invacare XLT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

SECTION 8-SERVICE PROCEDURES 5. Run the chain around the bottom of the wheel sprocket and back up towards the hand crank sprocket. 6. Attach the chain together using the master link (w/clip) provided. 7. To tension chain, refer to Refer to Replacing the Fork/Crank Assembly on page 46. Hand Crank Sprocket Assembles STEP 5 Chain Derailleur and Wheel Sprockets STEP 3 STEP 4 FIGURE 8.8 Installing Twenty-Seven Speed Cassette Chain Adjusting Twenty-Seven Speed Cassette Chain NOTE: For this procedure, refer to FIGURE 8.9. 1. Loosen, but DO NOT remove the clamp that secure the crank handles to the fork. 2. Slide the crank handles up and/or down until the proper tension on the chain is achieved. NOTE: The proper chain tension will be approximately ½‐inch of chain slack. NOTE: If crank is in desired position but chain tension is not correct, links MUST be added to or removed from the chain to correct the tension. This should be performed by a qualified technician. 3. Tighten the clamp that secure the crank handles to the fork securely. Recumbent Handcycle Series 56 Part No 1114850

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
SECTION 8—SERVICE PROCEDURES
Recumbent Handcycle Series
56
Part No 1114850
5.
Run the chain around the bottom of the wheel sprocket and back up towards the hand
crank sprocket.
6.
Attach the chain together using the master link (w/clip) provided.
7.
To tension chain, refer to Refer to Replacing the Fork/Crank Assembly
on page 46.
FIGURE 8.8
Installing Twenty-Seven Speed Cassette Chain
Adjusting Twenty-Seven Speed Cassette Chain
NOTE: For this procedure, refer to FIGURE 8.9.
1.
Loosen, but DO NOT remove the clamp that secure the crank handles to the fork.
2.
Slide the crank handles up and/or down until the proper tension on the chain is
achieved.
NOTE: The proper chain tension will be approximately ½
‐
inch of chain slack.
NOTE: If crank is in desired position but chain tension is not correct, links MUST be added to or
removed from the chain to correct the tension. This should be performed by a qualified technician.
3.
Tighten the clamp that secure the crank handles to the fork securely.
STEP 5
STEP 4
STEP 3
Hand Crank Sprocket
Assembles
Chain Derailleur and Wheel Sprockets