JVC BR-DV3000UB BR-DV3000U Pro-DV recorder 71 page instruction manual - Page 12

ON-SCREEN DISPLAY - Status display - (continued) 3 2K CH- 1 / 2 S P000m i n 5 04 / 01 / 02 STANDBY-OFF 4 1 1 : 2 0 : 0 0 TCR 0 2 : 0 0 : 0 0 : 0 0 3 No. Item 3 Time code 4 VTR operation mode 5 Remaining tape Memo If the display position of the time code is set to the upper right, this item will be displayed on the lower right Content • It displays the time codes (hour, minute, second and frame). During playback, the time codes recorded on the tape are displayed. TCR : time code reader data TCG : time code generator data DTCG : time code data input from a DV IN terminal • The symbols for the second and frame differ according to the framing modes. (NTSC only) 00 : 00 : 00 : 00 ¥ dot (.) is used for a dropped frame. colon (:) is used for a non-dropped frame. • The time code display position can be set via the COUNTER POSI. item of the DISPLAY menu. • The TIME CODE item can be set to turn on/off the time code display. • The user's bit is not displayed. It displays the VTR operation modes, including: PLAY, EJECT, FF, REW, STANDBY-ON, STANDBY-OFF, STILL, REC, REC PAUSE, A. DUB, A. DUB PAUSE, SHTL (shuttle search), JOG (F.ADV, R.ADV), BLANK SRH (blank search), NO CASSETTE (cassette not loaded), OPERATE OFF. When SHTL or JOG is displayed, the speed will also be displayed at the same time. • The VTR MODE item of the DISPLAY menu can be set to turn on/off the VTR operation mode display. It displays the remaining tape duration (minutes). If it is not identified, " - - - " is displayed. • The TAPE REMAIN item in the DISPLAY menu can be set to turn on/off the remaining tape duration display. • The SP display disappears when the DVCAM cassette is being played back. • Please use the remaining tape time as a gauge. 20 ON-SCREEN DISPLAY - Event display - Ⅵ Event display : When a specific function is in activation or when the operation status is changed with the remote controller, etc, the events will be displayed at the positions shown below. 3 2K CH- 1 / 2 S P000m i n A BLANK SEARCH B I NDEX DETECTED 04 / 01 / 02 11 : 20 : 00 S T ANDBY -OF F TCR 0 2 : 0 0 : 0 0 : 0 0 Ⅵ Display at position A ...Operation in progress Display Contents BLANK SEARCH Blank search in progress. INDEX + 1 Index search in progress. The number indicates the index search position. INDEX MARK When an index is written on the tape during recording. Ⅵ Display at position B ...Display for about 3 seconds Display Contents INDEX DETECTED Index is found during an index repeat operation. VIDEO END DETECTED Video end is found during a video end repeat operation. AUDIO MUTING Audio is muted with the re- ON mote controller. AUDIO MUTING Audio is de-muted with the OFF remote controller. Display AUDIO OUT LEVEL NORM AUDIO OUT LEVEL ATT Contents The standard level of the playback or EE audio level is set to NORMAL or ATT with the remote controller. AUDIO OUT CH-1/2 The playback audio channel is set to CH1/2, CH3/4 or MIX AUDIO OUT CH-3/4 with the remote controller. AUDIO OUT MIX DISPLAY ON The on-screen display is turned on with the remote controller. DISPLAY AUTO The on-screen display is set to AUTO with the remote controller. In the AUTO mode, the on-screen display is shown for about 4 seconds between mode switches. DISPLAY OFF The on-screen display is set to OFF with the remote controller. FIELD STEP Field by field advance playback is selected with the remote controller. 1ST FIELD STILL 2ND FIELD STILL When still or frame advance playback is selected with the remote controller, the type of still image is displayed. • 1st FIELD STILL • 2nd FIELD STILL • FRAME STILL FRAME STILL 21