JVC BR-DV3000UB BR-DV3000U Pro-DV recorder 71 page instruction manual - Page 25

PLAYBACK - Special playback - (continued) Variable speed playback Use the remote controller. ( ) SEARCH +/( ) button button ( ) button DISPLAY STILL BARS MODE BLANK MENU SEARCH+ AUDIO MUTING SET SEARCH- OUT SEL. OUT LEV. A.DUB PAUSE F.REV PLAY REC F.ADV Set the unit to the search mode. The main unit button can also be used to set the unit to the search mode. 1. Set the unit to the PLAYBACK or the STILL mode. 2. Press the FF button to execute fast-forward playback. Press the REW button to execute reverse playback. Ⅵ The search speed changes according to the following sequence each time the FF or REW button is pressed: X20¥X5¥X9¥X20 In DVCAM mode, the maximum speed is 15X. Changing the speed of fast-forward playback or reverse playback: REW FF STOP INDEX- INDEX+ REMOTE CONTROL UNIT RM-G3000 REW button SEARCH - /( ) button FF button Memo • The A. OUT AT SEARCH item of the AUDIO/VIDEO menu can be set to turn on/ off audio output during the search mode. • If 0.1 X speed playback (step slow) has been continued for about 40 seconds, the unit will automatically change to the 0.2 X speed playback (linear slow) in order to protect the tape. 46 Ⅵ During normal playback or forward search: If the SEARCH + (ᮡ) buttons are pressed, the playback speed increases. If the SEARCH - (ᮢ) buttons are pressed, the playback speed decreases. Ⅵ During reverse playback or reverse search: If the SEARCH + (ᮡ) buttons are pressed, the playback speed decreases. If the SEARCH - (ᮢ) buttons are pressed, the playback speed increases. The variable playback speed changes as follows in the forward and reverse direction. 0¥0.1¥0.33¥0.5¥1¥2¥5¥9¥20X speed (Still) * 0.1 X speed indicates step slow playback (continuous frame advance). Ⅵ During the STILL mode: If the SEARCH + (ᮡ) buttons are pressed, the tape will play in the forward direction. If the SEARCH - (ᮢ) buttons are pressed, the tape will play in the reverse direction. Changing the direction of playback Ⅵ To change from normal or fast-forward playback to reverse playback: • Press the p ( ᮤ ) button. If this button is pressed during playback, reverse playback will be engaged. Ⅵ To change from reverse or rewind playback to forward playback: • Press the P ( ᮣ ) button. If this button is pressed during reverse playback, normal playback will be engaged. If this button is pressed during rewind playback, fast-forward playback will be engaged. PLAYBACK - Locate function - Index search This function locates and advances/rewinds to the position where the index signal is recorded. Use the remote controller. A.DUB PAUSE F.REV PLAY REC F.ADV REW FF STOP INDEX- INDEX+ REMOTE CONTROL UNIT RM-G3000 INDEX - button INDEX + button Monitor screen Ⅵ To locate an index in the forward direction vis-a-vis the current tape position: • Press the INDEX + button. The index position to be located can be specified by the number of times this button is pressed. (Max: 99) Ⅵ To locate an index in the reverse direction vis-a-vis the current tape position: • Press the INDEX - button. The index position to be located can be specified by the number of times this button is pressed. (Max: 99) Ⅵ When the INDEX + or INDEX - button is pressed, the unit will fast-forward or rewind to the specified indexed position and start playing. INDEX+1 Memo • If the interval between index signals is less than 1 minute, the function may not work well. • The specifications for index signal recording varies with the device used. During index search, this message is displayed on the monitor (the number represents the position of the index). Blank search This function locates the unrecorded parts of the tape. Use the remote controller. BLANK button DISPLAY STILL BARS MODE BLANK MENU SEARCH+ AUDIO MUTING OUT SEL. Monitor screen Ⅵ In the STOP mode, press the BLANK button. ¥ • If the current position is at a recorded part of the tape, the unit fast-forwards until an unrecorded part is reached and goes into the STOP mode. • If the current position of the tape is unrecorded, the unit will first advance the tape in the forward direction for confirmation and thereafter rewind and go into the STILL mode at the last recorded position. • During a blank search, "BLANK SEARCH" is displayed on the monitor. BLANK SEARCH 47