JVC HD100 Instructions - Page 21

Getting Started Preparation Basic Operation ENGLISH b Adjust the focus Focus ENTER Press for 1 second or more Adjust accordingly by pressing the up down buttons c Adjust the image size (zoom) ENTER Zoom ENTER TIPS You can hide the image temporarily You can hide the image temporarily. HIDE A STANDBY/ON Green light blinks when the image is hidden Adjust accordingly by pressing the up down buttons z Switches between "Focus" and "Zoom" whenever the [ENTER] button is pressed. d To end EXIT z Press the [HIDE] button again to display image. z The power cannot be turned off when the image is temporarily hidden. F Turn off the power OFF While a confirmation screen is displayed OFF A STANDBY/ON Blinking (Red) Cool Down mode A STANDBY/ON Light on (Red) z The power cannot be turned off within approximately 90 seconds after it has been turned on. Start operation only after 90 seconds time. z You can also press the [STANDBY/ON] button on the unit to turn off the power. (pP11) z Put back the lens cap after use to prevent the lens from dirt. z Pull out the power plug when the unit will not be used for a prolonged time. MEMO About Cool Down mode z The Cool Down mode is a function to cool down the lamp for approximately 60 seconds after projection is complete. This function prevents the internal parts of the unit from deformation or damage due to overheating of the lamp. It also prevents lamp blowout and premature shortening of lamp life. z During Cool Down mode, the [STANDBY/ON] indicator blinks in red. z After the Cool Down mode is complete, the unit automatically returns to standby mode. z Do not pull out the power plug during Cool Down mode. This may shorten the lamp life and cause a malfunction. Settings Troubleshooting Others 21