JVC HD100 Instructions - Page 31
Install. > Line Display, Install. > Flip H, Install. > High Altitude Mode
UPC - 046838032745
View all JVC HD100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Getting Started Preparation Basic Operation ENGLISH Install. > Line Display a Line Display Sets whether to display the input when switching input. 5 sec Displays for 5 seconds. Off Do not display. Install. > Flip H b Flip H Select this when the image is projected from the back of the screen or when the projector is hung from the ceiling. Off Do not flip image to the left or right. On Flips image to the left or right. Install. > Flip V c Flip V Select this when the projector is hung from the ceiling. Off Do not flip image up or down. On Flips image up or down. Install. > High Altitude Mode d High Altitude Mode Select this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level). Off Do not activate. On Activate. Func. > Back Color e Back Color Configures the screen color displayed when there is no input signal. Blue Sets screen color to "Blue". Black Sets screen color to "Black". Func. > Sleep Timer f Sleep Timer Sets the lapse time before automatically switching to the standby mode when there is no input signal. 15 Switch to standby mode after 15 minutes. 30 Switch to standby mode after 30 minutes. 60 Switch to standby mode after 60 minutes. Off Do not switch to standby mode. Settings Troubleshooting Others 31