JVC HD100 Instructions - Page 25

Getting Started Preparation Basic Operation ENGLISH Setting Menu Item values shown in are factory settings. z Items that can be configured differ according to the input signals. Image > Image Adjust A Contrast Adjusts the contrast of the projected image. (Black) b50 f 50 (White) B Brightness Adjusts the brightness of the projected image. (Darken) b30 f 30 (Brighten) C Color Adjusts the color density of the projected image. (Lighten) b50 f 50 (Darken) D Tint Adjusts the hue of the projected image. (Red) b30 f 30 (Green) E Sharpness Adjusts the outline of the projected image. (Soft) b30 f 30 (Sharp) F DNR Adjusts the strength of noise removal of the projected image. (Weak) 0 f 30 (Strong) z "Contrast", "Brightness", "Color" and "Sharpness" can also be configured from the remote control. (pP12) z "Tint" can only be adjusted when NTSC signals are input to the video or S-video input terminal. Image > Color Temp. G Color Temp. Sets the color temperature of the projected image. Low Select this to give a reddish tinge to the image. Middle Select this to have a balanced image. High Select this to give a bluish tinge to the image. Red (Less red) b255 f 0 (More red) Memory10 Green (Less green) b255 f 0 (More green) Blue (Less blue) b255 f 0 (More blue) Red (Less red) b255 f 0 (More red) Memory20 Green (Less green) b255 f 0 (More green) Blue (Less blue) b255 f 0 (More blue) * The red, green and blue colors can be adjusted and registered respectively. z This setting can also be configured from the remote control. (pP12) Settings Troubleshooting Others 25