JVC HD100 Instructions - Page 45

Getting Started Preparation ENGLISH „ Command and data Operating command and data (Binary code) Command Type 0000 Connection check 5057 Power supply 4950 Input 4754 Gamma table 4750 4752 4747 4742 5453 5243 Gamma coefficient Gamma data (R) Gamma data (G) Gamma data (B) Test pattern Remote Control Data description Checks whether communication is available between this unit and the PC during standby. During standby 31 : Turns on the power. During power on 30 : Turns off the power. (Standby mode) During power on 30 : S-VIDEO 31 : VIDEO 32 : COMP. 36 : HDMI 1 37 : HDMI 2 During power on 30 : Switches to "Normal". 31 : Switches to "Theater1". 32 : Switches to "Theater2". 33 : Switches to "Dynamic". 34 : Switches to "Custom". 30 : 1.8 31 : 1.9 32 : 2.0 33 : 2.1 34 : 2.2 35 : 2.3 36 : 2.4 37 : 2.5 38 : 2.6 Sets the gradation (0 ~ 1023) of the output signal in hexadecimal. The data is 16 bit (2 byte) with the 2 byte data in the high/low order. Same as gamma data (R). Same as gamma data (R). During power on 30 : Do not display. 36 : Displays staircase (gray). Sends the same code as the supplied remote control. z "Remote control code" (pP47) Basic Operation Settings Troubleshooting Others 45