JVC HD100 Instructions - Page 28
Setup > Picture Position, Setup > HDMI Input Level, Setup > Mask, Setup > Overscan - pal
UPC - 046838032745
View all JVC HD100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
4 Settings Setting Menu (Continued) Setup > Picture Position M Picture Position Adjusts the horizontal/vertical position of the projected image. z The display position value varies with the input signal. z This adjustment is available for analog input signals, or for COMPONENT and HDMI-1/2 input signals when "V-Stretch" is set to "On". Setup > HDMI Input Level N HDMI Input Level Configures the input level setting of the HDMI input terminal. Standard For normal circumstances, select this setting. Enhanced Select this setting when the black-and-white of the projected image is unclear when RGB video signals are input from DVI devices. z This setting is available only when projecting the HDMI input. Setup > Mask O Mask Masks (Hides) the outer area of the projected image. 2.5% Masks 2.5 % of the screen. 5% Masks 5 % of the screen. Off No masking. z Masking is available only when high definition images are input. Setup > Overscan P Overscan Selects whether or not to set overscan for the 4:3 video signals (NTSC, PAL, SECAM, 480i, 576i, 480p and 576p). Off No overscan. On Overscans the top, left, bottom and right at 2.5 % each. z This setting is not available when PC signals are input to HDMI terminal. Source > COMP Q COMP Configures the input signals of the component video input terminals. Y Pb/Cb Pr/Cr Select this when component video signals are input. RGB Select this when RGB video signals are input. SCART Select this when RGB video signals and sync signals are input from SCART plug for European market. z This setting is available only when projecting the component video input. Source > HDMI R HDMI Configures the input signals of the HDMI input terminal. Auto Automatically configures input signals. YCbCr(4:4:4) Select this when Y Cb Cr (4:4:4) video signals are input. YCbCr(4:2:2) Select this when Y Cb Cr (4:2:2) video signals are input. RGB Select this when RGB video signals are input. z This setting is available only when projecting the HDMI input. 28