JVC KD-ADV38 Instructions - Page 114
Select Bluetooth Phone or Bluetooth, Enter a PIN Personal Identification
UPC - 046838030499
View all JVC KD-ADV38 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
ENGLISH Registering using 1 Select "Bluetooth Phone" or "Bluetooth Audio." Bluetooth Phone FLAT NEW DEVICE 15: 45 Select "NEW DEVICE" by pressing 5 / ∞. 2 AV Menu Setup ENT Enter 3 AV Menu Bluetooth ENT Enter Bluetooth menu icon 4 NEW DEVICE Dial Menu Message Open Search Special Device 5 Enter a PIN (Personal Identification Number)* code to the unit. • You can enter any number you like (1-digit to 16-digit number). * Some devices have their own PIN code. Enter the specified PIN code to the unit. PIN Code 1234 ENT Enter 7 Operate the target Bluetooth device. (While "Open..." is flashing on the screen.) Enter the same PIN code (as entered in the above step) on the device to be connected. Now connection is established and you can use the device through the unit. The device remains registered even after you disconnect the device. Use (or activate ) to connect the same device from next time. (☞ pages 58 and 59) Searching for available devices Perform steps 1 to 3 on the left, then... 1 NEW DEVICE Dial Menu Message Open Search Special Device The unit searches for available devices and displays the list of them. (If no available device is detected, "Device Unfound" appears.) 2 Select a device you want to connect. 3 Enter the specific PIN code of the device to the unit. • Refer to the instructions supplied with the device to check the PIN code. • To delete an unwanted digit, select blank space. 4 Use the Bluetooth device to connect. 6 Now connection is established and you can use the device through the unit. 34