JVC KD-ADV38 Instructions - Page 136
Equalizer, Sound
UPC - 046838030499
View all JVC KD-ADV38 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
ENGLISH Equalizer Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3, ☞ [48] Sound Menu items Fader/Balance Adjusts fader Adjust balance Selectable settings, [reference page] Adjust fader-speaker output balance between the front and rear speakers. • Upmost-front only • Downmost-rear only When using a two-speaker system, set the fader to the center (00). Adjust balance-speaker output balance between the left and right speakers. • Leftmost-left only • Rightmost-right only Volume Adjust Adjust and store auto-adjustment volume level for each source, comparing to the FM volume level. The volume level will automatically increase or decrease when you change the source. -12 to +12; Initial 00 Subwoofer*14 Adjust the settings below in the submenu: Phase : Subwoofer phase. Select either or , which reproduces a better sound. Level : Subwoofer output level. Level: -06 to +08; Initial 00 High Pass Filter Through : Select when the subwoofer is not connected. On : Select when the subwoofer is connected. Crossover Adjust the crossover frequency between the front/rear speakers and the subwoofer. 80Hz, 120Hz, 150Hz Amplifier Gain You can change the maximum volume level of this unit. Off : Deactivates the built-in amplifier. Low Power : VOL 00 to 30 (Select this if the maximum power of the speakers is less than 50 W.) High Power : VOL 00 to 50 Rear Speaker*15 You can activate/deactivate the rear speakers. Off, On *14 This subwoofer level setting takes effect only when surround is deactivated. (☞ also page 24, 25) *15 This setting takes effect only when Dual Zone is activated. (☞ also page 28) 56