JVC KW-M750BT Operation Manual - Page 74
Speaker / X’over setup, When Speaker network is set to 3-way
View all JVC KW-M750BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Controlling Audio Speaker / X'over setup 1 Press the [FNC] button. hhPopup menu appears. 2 Touch [Audio]. hhAudio screen appears. 3 Touch [Speaker / X`over]. 4 Select a car type. You can select the car type and speaker network, etc. When you select your car type, the Delay Time Alignment is activated automatically (for timing adjustment of sound output for each channel) to have the highest surround effects. ■■[Tweeter] (Only for Front) You can set up the tweeter when you are selecting front speakers. None, Small, Medium, Large ■■ [X`over]* Display the speaker crossover setup screen. You can adjust the crossover frequency that was set automatically when you selected the speaker type. For details, see Crossover network setup (P.75) * Only when "Speaker" is set to a mode other than "None". When Speaker network is set to 3-way: 1 2 5 Touch the speaker (1) you wish to adjust and set each parameter (2) as follows. 1 2 NOTE • For how to switch to the 3-way speaker system, see 3-way speaker system setup (P.73). Connecting 3-way speakers with the 2-way mode selected can break the speakers. • Select "None" if you have no speakers. ■■ [Speaker] You can select a speaker type and its size to get the best sound effects. When the speaker type and size are selected, the speaker crossover network is set automatically. ■■[Location] (Only for Front, Rear) Select the speaker position you have installed. 74