JVC KW-M750BT Operation Manual - Page 86
Supplied accessories for, installation, Installation procedure, KW-V850BT/ KW-V85BT
View all JVC KW-M750BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Connection/Installation (KW-V850BT/ KW-V85BT) ÑÑSupplied accessories for installation 1 Cooling fan (KW-M750BT/ KW-M75BT/ KW-M650BT) Cooling fan • Do not press hard on the panel surface when installing the unit to the vehicle. Otherwise scars, damage, or failure may result. • Reception may drop if there are metal objects near the Bluetooth antenna. Bluetooth antenna unit x1 2 (3 m) x1 3 (M5 x 8 mm) x6 4 (M5 x 8 mm) x6 5 [1] (2 m) x1 [1] KW-M750BT/ KW-M75BT/ KW-M650BT only ÑÑInstallation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery. 2) Make the proper input and output wire connections for each unit. 3) Connect the speaker wires of the wiring harness. 4) Connect the wiring harness wires in the following order; ground, battery, ignition. 5) Connect the wiring harness connector to the unit. 6) Install the unit in your car. 7) Reconnect the ¤ terminal of the battery. 8) Perform the Initial Setup. See Initial setup (P.8). 86