JVC KW-M750BT Operation Manual - Page 75
Crossover network setup
View all JVC KW-M750BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
ÑÑCrossover network setup You can set the crossover frequency of speakers. 1 Touch [X`over]. Controlling Audio When Speaker network is set to 3-way: 2 Touch the speaker to set up. 3 Set each parameter as follows. ■■[HPF FREQ] High Pass Filter adjustment. (When Front or Rear is selected on the Speaker Select screen) ■■[LPF FREQ] Low Pass Filter adjustment. (When Subwoofer is selected on the Speaker Select screen) ■■ [Slope]*1 Set a crossover slope. ■■ [Gain] Adjust the gain of the front speaker, rear speaker, or subwoofer. ■■[TW Gain] *2 Adjust the tweeter level. (When Front is selected on the Speaker Select screen) ■■[Phase Inversion] Set the phase of subwoofer output. Check [Phase Inversion] to shift the phase 180 degrees. (When Subwoofer is selected on the Speaker Select screen) *1 Only when "LPF FREQ"/"HPF FREQ" is set to a mode other than "Through" in [X`over]. *2 Only when "Tweeter" is set to "Small", "Medium", "Large" in [Speaker Setup]. ■■[FREQ] (High Pass) High Pass Filter adjustment. ■■[HPF FREQ], [LPF FREQ] (Band Pass) Band Pass Filter adjustment. (When Mid Range Speaker is selected on the Speaker Select screen) ■■[FREQ] (Low Pass) Low Pass Filter adjustment. (When Woofer is selected on the Speaker Select screen) ■■ [Slope]*1 *2 Set a crossover slope. ■■ [Gain] Set the gain of each speaker. ■■[Phase Inversion] Set the phase of tweeter, mid range, and woofer output. Check [Phase Inversion] to shift the phase 180 degrees. *1 Only when "LPF FREQ"/"HPF FREQ" (Band Pass) is set to a mode other than "Through" in [X`over]. *2 Only when "FREQ" (Low Pass) is set to a mode other than "Through" in [X`over]. NOTE • For how to switch to the 3-way speaker system, see 3-way speaker system setup (P.73). Connecting 3-way speakers with the 2-way mode selected can break the speakers. English 75