JVC KY-F1030U KY-F1030U digital camera 52 page instruction manual (550KB, PDF) - Page 13

Part names and their functions [Front and bottom] ² ¶ ¿ ³ ´ · » ³ Lens mount Although the lens mount conforms to the type C mount lens. Mounting the lens ( ੬ page E17) · Camera mounting bracket Although the mounting bracket is mounted on the bottom of the camera when shipped, the bracket can also be mounted on the top of the camera. Mounting the camera ( ੬ page E19) » Locking screws for the camera mounting bracket (M2.6 × 6mm, 3 units) CAUTION ● Always use the attached screws. Using screws that exceed 6mm may result in malfunction of the unit. ● When the bracket is mounted on the top surface of the camera, use the provided screws (length: 10 mm). ¿ Screw holes for mounting the camera (1/4-inch) Used when mounting the camera to a fixer or rotating platform. ´ Side switch panel (inside) Open the door to access a switch panel used when making settings on menus. Side switch panel section ( ੬ page E11) ² [FOCUS] backfocus adjustment screw This is adjusted to the optimal wide setting when shipped from the factory. Should be readjusted when required by the lens used in combination with the camera. Focus adjustment ( ੬ page E24) ¶ [LOCK] backfocus locking screw Screw to lock the backfocus adjustment mechanism. Focus adjustment (੬ page E24) E9