JVC KY-F1030U KY-F1030U digital camera 52 page instruction manual (550KB, PDF) - Page 41

PROCESS screen [ ] indicates the factory setting Item DETAIL Set Value [ON] OFF LEVEL When "ON" is selected NOISE SUP. When "ON" is selected -7 -6 • [NORMAL] • 7 [OFF] LOW MIDDLE HIGH Contents Used to set whether to emphasize details (contours). ON: Detail emphasis is performed. OFF: Detail emphasis is not performed. When [DETAIL] is set to "ON", the emphasis level of the detail is adjusted. Increasing the value: Sharpens details Decreasing the value: Softens details Reduces noise in the video signal. OFF: Noise reduction is not performed. LOW, MIDDLE, HIGH: Noise reduction is performed. The reduction rate increases in the order of LOW ➝ MIDDLE ➝ HIGH. MEMO Note that when the noise reduction is increased, de- tails may get lost in the coarse parts of the image. GAMMA MASTER BLACK FLARE LEVEL (R) When "ON" is selected LEVEL (B) When "ON" is selected [ON] OFF -32 -31 • [0] • 31 [ON] OFF -32 -31 [NORMAL] • 31 -32 -31 [NORMAL] • 31 ON: OFF: The video signal is compensated to make the image viewed on the screen natural. No compensation and the video signal is output linearly. Used to adjust the pedestal level (master black), which is the standard of black when the lens is capped. To see more details in black areas, raising the pedestal level will brighten the entire screen. Increasing the value: Raises the pedestal level Decreasing the value: Lowers the pedestal level Compensation of the black level when flaring effect occurs and black areas are tinted with color due to irregular reflection of light entering the lens. Compensation of the black level of Rch Increasing the value: Red tint becomes weaker Decreasing the value: Red tint becomes stronger Compensation of the black level of Bch Increasing the value: Blue tint becomes weaker Decreasing the value: Blue tint becomes stronger E37