JVC KY-F1030U KY-F1030U digital camera 52 page instruction manual (550KB, PDF) - Page 37
Menu contents, EXPOSURE screen
View all JVC KY-F1030U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Menu contents 1 : EXPOSURE Used for settings related to the video level, such as iris, shutter, sensitivity, etc. 2 : WHITE BALANCE: ........ Used to make settings for color temperature and white balance. 3 : PROCESS Used to make settings for detail compensation, gamma, master black, flare compensation, Auto Black Level (ABL), etc. 4 : LENS Sets the control method for the lens iris and lens focus, and zoom control method. 5 : SYSTEM SETTING: ...... Sets the screen display method and level of test pattern. EXPOSURE screen [ ] indicates the factory setting Item IRIS MODE Set Value [AUTO] MANUAL AE LEVEL -128 -127 : [NORMAL] : 126 127 Contents Switched in accordance with the used lens. AUTO: When using auto-iris lens. MANUAL: • When using manual iris lens. • Lens not mounted • When using manual iris while auto-iris lens is mounted. *When the auto-iris lens cable is not connected to the [LENS] connector, the setting automatically becomes "MANUAL". Used to adjust the video level when auto-iris, ALC and EEI are used, Increasing the value: Raises the level Decreasing the value: Lowers the level MEMO "----" is displayed when auto-iris, ALC, and EEI are all set to not operate. AE AREA [FULL] SQUARE SPOT Used to set the detection area for auto-iris. Switch the setting in accordance with the conditions of use. FULL SQUARE SPOT Detection area Detection area MEMO During selection of the detection area, the detection area is shown on the screen connected to the analog output. IRIS LEVEL 0 1 • [128] • 254 255 Detection area Used to set the iris level when the IRIS MODE is set to "MANUAL". Increasing the value: Opens the iris Decreasing the value: Closes the iris E33