JVC KY-F1030U KY-F1030U digital camera 52 page instruction manual (550KB, PDF) - Page 20
Combining with a presentation system
View all JVC KY-F1030U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2. Before shooting (continued) Combining with a presentation system The image shot by the KY-F1030 can be passed though a scan rate converter and shown on a D-ILA presenter or SXGA-compliant monitor. Connect the power supply ( ੬ page E18) ""1 AC ADAPTER AA-P700 POWER ON OFF "$ AC adapter D-ILA or SXGA-compliant monitor JVC KM-F700 FOCUS LOCK Mount the lens ( ੬ page E17) [VIDEO INPUT] terminal Scan rate converter 1. Connect the KY-F1030's [ANALOG OUT] connector to the scan rate converter's [VIDEO INPUT] terminal. 2. Connect the AC adapter (AA-P700) to the KY-F1030, and then turn ON the power. 3. Turn ON the other devices. * Also see the instructions for the scan rate converter to be used. MEMO • When connected to the PC through the [IEEE1394] connector, or an RS-232C device is connected to the [REMOTE] terminal, the auto white balance function of the scan rate converter will be disabled. • When the shutter speed becomes slower (slower than 1/7.5s), the image may be seen interrupted. • The image will not freeze even when the scan rate converter's [FREEZE] button is pressed. • The scan rate converter's [SEND] command is invalid. E16