JVC KY-F1030U KY-F1030U digital camera 52 page instruction manual (550KB, PDF) - Page 15

Part names and their functions (continued) [Side switch panel section (inside)] ƺƻ Ƽ UP/AW MENU SET ƽ DOWN 1 2 34 ƾ Ƽ [SET] button While the menu screen is displayed, press this button to select a submenu or confirm a selected item or set value. Setting procedure( ੬ page E32) ƽ [DOWN] button While the menu screen is displayed, press this button to move down to a selectable item on the menu. While an item is selected, use this button to change the set value. Setting procedure( ੬ page E32) ƾ Function setting switch Used for setting the functions of the KYF1030. ƺ [MENU] button Press this button to output the menu screen through the [ANALOG OUT] connector ᕦ. Press again to stop display of the menu. Setting procedure ( ੬ page E32) ƻ [UP/AW] auto white balance, UP button ● [AW (auto white)] Press this button to adjust the white balance when the light source illuminating the subject changes. White balance adjustment ( ੬ page E22) ● [UP] While the menu screen is displayed, press this button to move up to a selectable item on the menu. While an item is selected, use this button to change the set value. Setting procedure ( ੬ page E32) ON OFF 1 23 4 ● Switch 1 ON: Test signal is output. OFF: The image being shot by the camera is output. Monitor adjustment ( ੬ page E21) SYSTEM SETTING screen ( ੬ page E40) ● Switch 2 ON: Disables the [MENU] button ƺ. OFF: Enables the [MENU] button ƺ. ● Switch 3 ON: Applies the sync signal to the green (G) channel of the video signal that is output through the ANALOG OUT connector º. OFF: The sync signal is not applied. ● Switch 4 This switch is not used. Leave it at OFF. E11