JVC KY-F1030U KY-F1030U digital camera 52 page instruction manual (550KB, PDF) - Page 19
Connecting through analog output connector
View all JVC KY-F1030U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Connecting through analog output connector The image shot by the KY-F1030 can be shown on the computer's monitor. Connect the power supply ( ੬ page E18) ""1 AC ADAPTER AA-P700 POWER ON OFF "$ AC adapter FOCUS LOCK Microscope adapter Video capture board PC 1. Connect the KY-F1030's [ANALOG OUT] connector to the PC's capture board. 2. Connect the AC adapter (AA-P700) to the KY-F1030, and then turn ON the power. 3. Turn ON the PC. * For instructions on how to operate the video capture board or the employed application software, see the respective instruction manual. CAUTION Use a 1/2-inch C-mount microscope adapter compatible with the microscope to be employed. MEMO When the shutter speed becomes slower (slower than 1/7.5s), the image may be seen interrupted. Also, the image will not freeze even when the external trigger switch is pressed. E15