JVC KY-F1030U KY-F1030U digital camera 52 page instruction manual (550KB, PDF) - Page 43

PROCESS screen [ ] indicates the factory setting Item Set Value PIXEL COMP. [OFF] ON PIXEL CHECK Contents Selects whether or not white spot compensation should be performed. OFF : White spot compensation not performed. ON : White spot compensation performed. ੬ page E28 [White spot compensation] Detects the positions of white spots. ੬ page E28 [White spot compensation] LENS screen [ ] indicates the factory setting Item Set Value IRIS [AUTO] MANUAL IRIS LEVEL When "MANUAL" is selected SERVO SEL 0 1 • [128] • 255 [POSITION] SPEED FOCUS When "POSITION" is selected ZOOM When "POSITION" is selected 0 1 • [128] • 255 0 1 • [128] • 255 Contents Switched in accordance with the employed lens. AUTO: When auto-iris lens is employed. MANUAL: • When manual iris lens is employed. • No lens mounted. • When auto-iris lens is mounted but used as manual iris lens. * If the auto-iris lens cable is not connected to the [LENS] connector, the setting automatically becomes "MANUAL". Sets the iris level when "MANUAL" is selected for the IRIS MODE. Increasing the value: Opens the iris Decreasing the value: Closes the iris Sets the lens control method. Normally, use the "POSITION" setting. * If the lens control cable is not connected to the [MD CONTROL] connector, "---- " is displayed. Selects the focus position. Increasing the value: Focus far away Decreasing the value: Focus nearby Selects the zoom position. Increasing the value: Toward telephoto Decreasing the value: Toward wide-angle E39