Kenwood VRS-N8100 Instruction Manual - Page 26

Preparing for playback Preparations Network settings This unit can be connected to a PC through a LAN circuit. It is required to set up the network before connecting this unit to the PC. POWER ON/STANDBY ON/STANDBY INPUT SELECTOR ENTER MULTI CONTROL SETUP POWER RCVR Return Network Server Multi %/fi/@/# Enter Numeric keys Clear Setup Preparation Turn on the power to this receiver by pressing the POWER ON/STANDBY (For U.S.A. and Canada) or the ON/STANDBY (For Europe and Australia) key (or the POWER RCVR key on the remote). 1 Use the INPUT SELECTOR key (or the Network Server key) to select "NET SERVER". When the "NET SERVER" input is selected, the OSD function on the TV screen is activated and detection of the server starts. SEARCHING 2 Use the MULTI CONTROL @/# (or the Multi @/# keys) to select "SETUP", and press the ENTER (or the Enter key) . WARNING Could not detect server. Please chek following item. 1. Starting server 2. Starting PC application 3. Install PC application 4. Network connection & setting SETUP RETRY 26 EN 3 Use the MULTI CONTROL %/fi (or the Multi %/fi keys) to select "Network Setup", and press the ENTER (or the Enter key) . NET LINK PC SERVER1 Receiver Setup Network Setup Exit Setup Menu 4 Use the MULTI CONTROL %/fi (or the Multi %/fi keys) to select the setting item, and press the ENTER (or the Enter key) . When the "Main" has been selected : NET LINK Network Setup Back Main IP Back Menu Language Video Out Screen Saver Black Level Setup Fifmware Update English NTSC/CVBS/Y/C ON 7.5 IRE 1 "Main" Setting: ¶ This includes the setting of the language of the OSD menu, setting of the video format used when this unit outputs the video or photo data in PC that has been input through the network, setting of the screen saver, setting of the black level, and updating of the firmware. 2 "IP" Setting: ª This consists of the setting of the IP address. 3 "Back": Select "Back" and press the ENTER (or the Enter key) to return to the previous display. (The same operation is also available by pressing the Return key or Multi @ key) ÷ While the main setup screen is displayed, the setup mode can be canceled by pressing the SETUP key (or the Setup key). 5 Use the MULTI CONTROL %/fi (or the Multi %/fi keys) to select an option or input the desired numeric or alphabetic characters using the numeric keys, and then press the ENTER (or the Enter key). ÷ If you made a mistake, press the Clear key and input the correct character. When the "Menu Language" has been selected : NET LINK Network Setup Back Main IP Back Menu Language Video Out Screen Saver Black Level Setup Fifmware Update Back English German French Spanish Italian Dutch Japanese 6 Press the ENTER (or the Enter key) again to return to the main setup displays. 7 Turn off the power to this receiver by pressing the POWER ON/ STANDBY (For U.S.A. and Canada) or the ON/STANDBY (For Europe and Australia) key (or the POWER RCVR key).