Kenwood VRS-N8100 Instruction Manual - Page 33
Recording
UPC - 019048156235
View all Kenwood VRS-N8100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Receiver Operations Recording Analog sources INPUT SELECTOR 1 Use the INPUT SELECTOR key (or the input selector key) to select the source (other than "VIDEO 1") you want to record. 2 Put the component connected to the VIDEO 1 jacks to the record-pause mode. 3 Start playback, then start recording. ÷ Recording may not be normal for some video software. This is due to the copy guard condition. Digital sources Switch on the REC MODE to record a digital input source. When the digital mode changes during recording in the REC MODE, the audio signal may be interrupted momentarily. DVD Stereo DIGITAL VOL -75dB DVD Stereo ↓ REC MODE VOL -75dB The display switches automatically. 4 Start playback, then start recording. Recording music in REC mode When a multi-channel source such as the Dolby Digital or DTS input signal is recorded in REC mode, the multi channel signal in the current surround mode can be recorded down-mixed to 2-channel. INPUT SELECTOR SETUP 1 Use the INPUT SELECTOR key (or the Input Selector keys) to select the source ("DVD", "VIDEO 2", "AUX", "GAME" or "NET SERVER") you want to record. 2 Put the component connected to the VIDEO 1 jacks to the record-pause mode. 3 Press and hold the SETUP key on the main unit for more than 2 seconds to select the "REC MODE". 1 REC mode off 2 "REC MODE": REC mode on Multi-channel digital signals (DTS or Dolby Digital) are down-mixed to 2-channel before being output from the analog recording (REC OUT) jacks. 33 EN