Kenwood VRS-N8100 Instruction Manual - Page 27

Preparing for playback "Main" Setting The settings available in this menu includes the setting of the language of the OSD menu, setting of the video format used when this unit outputs the video or photo data in PC that has been input through the network, setting of the screen saver, setting of the black level, and updating of the firmware. The default setups are as follows. "Menu Language" Setting: "English" "Video Out" Setting: "NTSC CVBS&Y/C" (For U.S.A. and Canada) "PAL CVBS&Y/C" (For Europe and Australia) "Screen Saver" Setting: "ON" "Black Level Setup" Setting: • "7.5 IRE" (For U.S.A. and Canada) "0 IRE" (For Europe and Australia) "Menu Language" Setting: This setting item is used to set the language used to display the setup menu and OSD on the TV screen. NET LINK Back Main IP Back Menu Language Video Out Screen Saver Black Level Setup Fifmware Update Network Setup Back English German French Spanish Italian Dutch Japanese 1 "English" 2 "German" 3 "French" 4 "Spanish" 5 "Italian" 6 "Dutch" 7 "Japanese" "Video Out" Setting: This setting item is used to select the format of the video signal output at the VIDEO OUT jacks. The video format should be selected according to the video format of the connected TV. Press the Video Out key to switch the video format temporarily. I As this is merely a temporary setting, the video format should be re-set in the network setting operation. NET LINK Back Main IP Back Menu Language Video Out Screen Saver Black Level Setup Fifmware Update Network Setup Back NETnSgClisChVBS&YC NNTTSC/CVVBBSS/&Y/YCCbCr N4T:3SC CVBS&RGB P3AmL CinViBteSs&YC PDAiLsaCbVlBeS&YCbCr NTSC CVBS&RGB 480p YCbCr 720p YCbCr 1080i YCbCr Video Format Composite Output 1 NTSC 2 NTSC 3 PAL 4 PAL 5 480p (NTSC) 6 576p (PAL) 7 720p 8 1080i CVBS CVBS CVBS CVBS S Video Output Y/C ---Y/C Component output ---- Y Cb Cr ---- Y Cb Cr Y Cb Cr Y Cb Cr Y Cb Cr Y Cb Cr ÷ The initial setting is "NTSC CVBS&Y/C" (For U.S.A. and Canada). ÷ The initial setting is "PAL CVBS&Y/C" (For Europe and Australia). Video Formats There are roughly two kinds of video formats that are used to display TV pictures and video data (NTSC and PAL). These formats are used according to the countries and regions. TV formats in major countries "NTSC": Japan, Taiwan, Korea, USA, Canada, Mexico, Philippines, Chile, etc. "PAL": China, U.K., Germany, Australia, New Zealand, Kuwait, Singapore, etc. Interlaced scanning and progressive scanning These are the two scanning methods for displaying the TV picture. Interlaced scanning displays a TV picture by drawing every other scanning line from the top of the screen, and progressive scanning draws all scanning lines from the top of the screen. Progressive scanning offers a TV picture with fewer flickers than interlaced scanning. The figure used in the video format name indicates the number of effective scanning lines. Example: "720p": Progressive scanning with 720 effective scan- ning lines "1080i": Interlaced scanning with 1080 effective scan- ning lines "Screen Saver" Setting: This setting item is used to set the screen saver function. NET LINK Back Main IP Back Menu Language Video Out Screen Saver Black Level Setup Fifmware Update Network Setup Back ON OFF 1 "ON": The screen saver starts when you leave this unit in stop mode for about 5 minutes. 2 "OFF" 27 EN Preparations