KitchenAid KDRP462LSS Use and Care Guide - Page 14

Use the following chart as a guide for cookware material characteristics. COOKWARE CHARACTERISTICS Aluminum s Heats quickly and evenly. s Suitable for all types of cooking. s Medium or heavy thickness is best for most cooking tasks. Cast iron s Heats slowly and evenly. s Good for browning and frying. s Maintains heat for slow cooking. Ceramic or Ceramic glass s Follow manufacturer's instructions. s Heats slowly, but unevenly. s Ideal results on low to medium heat settings. Copper s Heats very quickly and evenly. Earthenware s Follow manufacturer's instructions. s Use on low heat settings. Porcelain enamel- s See stainless steel or cast iron. on-steel or cast iron Stainless steel s Heats quickly, but unevenly. s A core or base of aluminum or copper on stainless steel provides even heating. ELECTRONIC OVEN CONTROL Displays When power is first supplied to the appliance, "PF" will appear. If "PF" appears at any other time, a power failure has occurred. Turn the SELECTOR control knob to the RESET position, press the ENTER button, and follow the clock setting instructions in the "Clock" section. Selector and Set Control Knobs All cooking functions are set with the SELECTOR control knob. The selected function will automatically begin with current settings after 10 seconds if other settings are not changed. Once a cycle is complete, turn the SELECTOR control knob to the RESET position to select a new function. All temperature or time adjustments are set with the SET control knob. All temperature adjustments are displayed in 5°F (3°C) increments. The speed with which the knob is turned is reflected on the display. Enter and Cancel The ENTER button begins any oven function. The CANCEL button stops any oven function except for the Clock/Time of Day. After canceling an operation, "End" will be displayed to show the function was canceled. The cooling fan might continue operating after a function has ended, but will shut off automatically when the oven has cooled. Clock This is a 12-hour clock and does not show a.m. or p.m. To Set: 1. Turn the SELECTOR knob to the RESET position. 2. Press the ENTER button until the display shows "12:00" and the CLOCK indicator is blinking. 3. Turn the SET knob to set the time of day. 4. Press the ENTER button to accept time on display. 5. On double oven models, the clock can be set from either electronic oven control. The time will automatically update on the second clock after step 4. To Change: Repeat steps 2-4 to change time of day to the display. 1. Display 2. Selector Control Knob 3. Set Control Knob 14