Kodak 5 All-in-One User Guide - Page 20

Loading Plain Paper, Loading 4 x 6 Photo Paper, Handling and Loading Paper

Page 20 highlights

Handling and Loading Paper Loading Plain Paper 1 Pull the paper tray all the way out until the paper guide flips up on the right side. 2 Slide the paper-width guide to its left-most position. 3 Align the edges of a stack of paper. 4 Insert the stack of paper into the paper tray with the print-side down. 5 For paper less than 8.5 inches wide, squeeze the paper-width guide and slide it to the right until it lightly touches the stack of paper. 6 Leave the aperp tray open when paper is loaded. 7 Pull the output tray extender all the way out. 8 Lift the small gray paper stop (at the near edge of the output tray extender) until it is perpendicular to the tray. Loading 4 x 6 Photo Paper You can load up to 30 sheets of 4 x 6 inche (101 x 150 mm) photo paper into the paper tray. Photo paper must be loaded coated side facing down. 1 Remove all other paper from the paper tray. 2 Insert photo paper into the right side of the paper tray print-side down, with the short edge forward. Do not overload the paper tray. 3 Slide the paper forward until it stops. 4 Squeeze the paper-width guide and slide it to the right until it touches the loaded paper. 5 Leave the paper tray open while the paper is loaded. 14 Kodak ESP 5 Printer User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81

Handling and Loading Paper
14
Kodak ESP 5 Printer User Guide
Loading Plain Paper
1
Pull the paper tray all the way out until the paper
guide flips up on the right side.
2
Slide the paper-width guide to its left-most
position.
3
Align the edges of a stack of paper.
4
Insert the stack of paper into the paper tray with
the print-side down.
5
For paper less than 8.5 inches wide, squeeze the
paper-width guide and slide it to the right until it
lightly touches the stack of paper.
6
Leave the aperp tray open when paper is loaded.
7
Pull the output tray extender all the way out.
8
Lift the small gray paper stop (at the near edge
of the output tray extender) until it is
perpendicular to the tray.
Loading 4 x 6 Photo Paper
You can load up to 30 sheets of 4 x 6 inche (101 x
150 mm) photo paper into the paper tray. Photo
paper must be loaded coated side facing down.
1
Remove all other paper from the paper tray.
2
Insert photo paper into the right side of the
paper tray print-side down, with the short edge
forward. Do not overload the paper tray.
3
Slide the paper forward until it stops.
4
Squeeze the paper-width guide and slide it to
the right until it touches the loaded paper.
5
Leave the paper tray open while the paper is
loaded.