Kodak 5 All-in-One User Guide - Page 57
Print Spotted, Print Too Dark, Print Too Light., Printing Slow, Probable Cause, Corrective Action
UPC - 041778184769
View all Kodak 5 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Chapter 8 Print Spotted Probable Cause Paper may be dirty. Corrective Action Use a dry, lint-free cloth to wipe clean. For excessive dirt or debris, thoroughly clean the paper tray, and load new paper. Note: When you are not using the printer, keep paper tray cover closed to keep dust and debris from collecting on the paper or inside the printer. Print Too Dark • Try retaking the picture with the flash on, or move within the flash range of the camera. Refer to your camera user's guide for details • Adjust the exposure compensation on your camera, and try taking the picture again. Refer to your camera user's guide for details • Edit the picture using Kodak Home Center or other image editing software • Make sure the printer is not placed in direct sunlight or is not operating in a high- temperature environment Print Too Light. Caution: For best results, use Kodak paper and ink cartridges for your Kodak All-in-One printer. • Make sure the paper is loaded with the print side face down. Reload it if necessary • Try taking the picture again with the flash off. Refer to your camera user's guide for details • Adjust the exposure compensation on your camera and try taking the picture again. Refer to your camera user's guide for details • Edit the picture on your computer Printing Slow Note: When printing a large number of prints, printing may slow down to prevent the printhead from overheating. • Make sure the printer is not placed in direct sunlight or is not operating in a high- temperature environment (higher than 95° F., or 35° C) • Close unnecessary software applications Kodak ESP 5 Printer User Guide 51