Konica Minolta AccurioPress 6120 AccurioPress 6136/6136P/6120 Daily Maintenanc
Konica Minolta AccurioPress 6120 Manual
View all Konica Minolta AccurioPress 6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta AccurioPress 6120 manual content summary:
- Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 1
- Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 2
Notations and symbols used in this manual 7 CAUTION - This symbol indicates that negligence of the instructions may lead to mishandling that of User's Guide. This guide describes product names and system configurations as follows. Product name Conventions used in this guide AccurioPress 6136 / - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 3
instructions in the related user's guides are observed, - Legal restrictions on copying or printing (refer to instruction booklet "Safety Information") are observed, - Inspection and maintenance instructions and troubleshooting described in user's guides. Everyone who uses this system - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 4
for each job...2-6 Adjustment Timing ...2-6 Adjustment Order...2-6 How to Operate the Both Sides Adj. Item 2-7 Fine-adjusting the gap between side guide plates of Paper Feed Unit PF-710 2-7 [Front] Adjustment...2-11 [Scan Meas.] Adjustment ...2-16 [Rotate/Skew] Adjustment ...2-24 [Gap] Adjustment - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 5
machine 3-22 [Density Balance Auto. Adj.]...3-28 [Maximum Density Adjustment] ...3-37 [Max. Density Auto Adj.]...3-39 Checking the Color Density Control Setting 3-41 [Color density manual control] ...3-43 [Package Color Auto Adj.]...3-46 AccurioPress 6136/6136P/6120 1-2 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 6
1 Daily Care - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 7
1.1 Daily Cleaning 1 1 Daily Care 1.1 Daily Cleaning Care timing To help ensure stable output on the machine, clean the machine before outputting a job. Every day, check the cleaning locations before turning the main body on. If any stains are found, wipe them off. Cleaning locations Scan unit - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 8
1.2 Weekly Cleaning 1 1.2 Weekly Cleaning Care timing To help ensure stable output on the machine, clean the machine once a week. Once a week, check the cleaning locations before turning the main body on. If any stains are found, wipe them off. Cleaning location Scan unit Fusing unit Duplex part - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 9
elements, to clean the original glass. 2 Wipe the slit scan glass clean using a clean soft cloth. 3 Open the lever [DF1], and also open the conveyance guide. AccurioPress 6136/6136P/6120 1-4 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 10
1.3 Cleaning the Scanning Area 1 4 Wipe the slit scan glass (back) clean using a clean soft cloth. 5 Press the label part, and close the conveyance guide. 6 Close the ADF. AccurioPress 6136/6136P/6120 1-5 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 11
1.4 Cleaning the Fusing Unit 1 1.4 Cleaning the Fusing Unit If the fusing unit is dirty, follow the steps below to clean it. Check the cleaning locations before turning the main body on every day. 7CAUTION - Always check the cleaning locations before turning the main body on. - If the power is - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 12
1.4 Cleaning the Fusing Unit 1 5 Turn OFF the sub power switch, then turn OFF the main power switch. 6 Wipe the pre-fusing guide clean using a clean soft cloth. 7 Hold the lever [M8], and open the output unit. 8 Hold the lever [M9], and open the fusing output unit. 9 Wipe - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 13
1.4 Cleaning the Fusing Unit 1 10 Wipe the fusing separation claw/Up clean using a clean soft cloth. 11 Close the fusing output unit, and return the output unit to its original position. 12 Push the duplex part into the main body, then return the lever [M4] to its original position. 13 Close the - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 14
1.5 Cleaning the Duplex Part 1 1.5 Cleaning the Duplex Part If the duplex part is dirty, follow the steps below to clean it. Check the cleaning locations before turning the main body on every day. 7CAUTION - Always check the cleaning locations before turning the main body on. - If the power is - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 15
1.5 Cleaning the Duplex Part 1 5 Turn OFF the sub power switch, then turn OFF the main power switch. 6 Pull the handle in the direction indicated by the arrow, and remove the paper powder removal brush for the resist roller/Lw. 7 Wipe off paper powder attached to the paper powder removal brush - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 16
1.5 Cleaning the Duplex Part 1 9 While releasing two projections for each in the direction indicated by the arrow, remove three paper powder removal brushes for the resist roller/Up. 10 Wipe off paper powder attached to the paper powder removal brush for the resist roller/Up using a clean soft - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 17
1.5 Cleaning the Duplex Part 1 11 Return three paper powder removal brushes for the resist roller/Up to their original positions. % To return three paper powder removal brushes for the resist roller/Up to their original positions, check that the two projections for each get into the hole of the - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 18
1.5 Cleaning the Duplex Part 1 13 Clean the inlet of the duplex part using a soft cloth dampened with cleansing alcohol. 14 Close the lever [M1]. 15 Open the lever [M12]. 16 Clean off any dirt, paper pieces, and paper powder from the inlet of the duplex part using a soft cloth dampened with - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 19
1.5 Cleaning the Duplex Part 1 19 Clean the resist roller using a soft cloth dampened with alcohol (cleaner). 20 Clean the inside of the resist roller using a soft cloth dampened with alcohol (cleaner). % If the Centering sensor is dirty, always wipe off. 21 Close the lever [M3]. 22 Push the - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 20
1.6 Cleaning the Output Unit 1 1.6 Cleaning the Output Unit If the output unit is dirty, follow the steps below to clean it. 7CAUTION - Always check the cleaning locations before turning the main body on. - If the power is turned on while the main body doors are closed, the fusing unit may become - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 21
1.6 Cleaning the Output Unit 1 5 Turn OFF the sub power switch, then turn OFF the main power switch. 6 Open the lever [M7]. 7 Clean the transport roller using a soft cloth dampened with alcohol (cleaner). 8 Clean the decurler inlet roller using a soft cloth dampened with alcohol (cleaner). - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 22
1.6 Cleaning the Output Unit 1 9 Clean the opposite roller of the fusing outlet roller using a soft cloth dampened with alcohol (cleaner). 10 Close the lever [M7]. 11 Push the duplex part into the main body, then return the lever [M4] to its original position. 12 Close the left side door of the - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 23
1.7 Cleaning the Paper Feed Unit 1 1.7 Cleaning the Paper Feed Unit If the paper feed unit is dirty, follow the steps below to clean it. 1 Open the front door of the main body and the left side door of the main body. 2 Turn ON the main power switch, and turn ON the sub power switch. 3 Pull out - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 24
1.7 Cleaning the Paper Feed Unit 1 8 Wipe the part dirty with toner in the Tray 1 clean using a clean soft cloth. 9 Return Tray 1 to its original position. 10 Also, clean Tray 2 in the same way. AccurioPress 6136/6136P/6120 1-19 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 25
1.7 Cleaning the Paper Feed Unit 1 AccurioPress 6136/6136P/6120 1-20 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 26
2 Both Sides Adjust - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 27
2.1 What is Both Sides Adjust? 2 2 Both Sides Adjust 2.1 What is Both Sides Adjust? When performing 2-sided printing, you need to correct the misalignment between the Front and Back sides in order to align the printing positions of both sides. This operation is referred to as "both-sides - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 28
page 2-24 page 2-27 page 2-34 - With Intelligent Quality Optimizer IQ-501 mounted Adjustment order 1 2 3 Adjustment item Finely adjust the side guide plates of the paper tray (for PF-710) [AutoMeasure] Adjustment Registering Paper Profile Reference page 2-7 page 2-32 page 2-34 AccurioPress 6136 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 29
Reference page 2-7 page 2-11 page 2-16 - Without scanner (Original Glass) mounted Adjustment order 1 2 3-a 3-b Adjustment item Reference Finely adjust the side guide plates of the paper tray (for PF-710) [Front] Adjustment [Rotate/Skew] Adjustment: Prioritizes the accuracy of the image position - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 30
Quality Optimizer IQ-501 to correct an image misalignment. When adjustment is completed, the job is restarted automatically, so you do not need to manually perform job operations. The chart used for adjustment is output to a different tray from that used for a job. The adjustment result is applied - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 31
2.4 Adjustment flow for each job 2 2.4 Adjustment flow for each job 2.4.1 Adjustment Timing - Just before a job with important both-side accuracy is output - Just before a job with a wide printing area is output - When both-side accuracy is not desirable (you want to increase both-side accuracy) - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 32
other words, any gap is found between top and bottom edges of them, feeding trouble may be caused. In this case, follow the adjustment procedure below to properly fix the top and bottom edges of the side guide plates. 1 Withdraw the tray to be adjusted. % Trays cannot be withdrawn when the machine - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 33
. Item 2 4 Fix the position of bottom edges of the side guide plates. % Pushing the lock release lever of the front side guide plate, move the side guide plates to align them to the paper. NOTICE Avoid making the gap between the side guide plates too wide or too narrow for the paper to be - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 34
the position of the top edges of the side guide plates. % Move top edges of the side guide plates to align them to the paper, then turn the two side guide fixing knobs clockwise to fix the guides. NOTICE Avoid making the gap between the side guide plates too wide or too narrow for the - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 35
NOTICE Do not load above the limit level indicated on the side guide plate of the tray. Carefully load paper to be seated under the paper control If any gap is left between the rear guide plate and paper, the machine cannot detect the correct paper size, and machine trouble may be caused. 11 Push in the - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 36
2.5 How to Operate the Both Sides Adj. Item 2 2.5.2 [Front] Adjustment 1 Press [Paper Setting] on the [MACHINE] screen. 2 Press the tray in which the paper to be adjusted has been loaded. 3 Press [Recall]. AccurioPress 6136/6136P/6120 2-11 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 37
2.5 How to Operate the Both Sides Adj. Item 2 4 Select a paper profile of the paper brand (paper profile name), "Paper Size", "Paper Type", and "Weight", which are the same as for the paper to be adjusted, then press [OK]. If the desired paper profile is not found, press [Cancel]. A paper profile - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 38
2.5 How to Operate the Both Sides Adj. Item 2 7 Make sure that [Front] is selected, then press [Chart Adjustment]. 8 Press [Print Mode]. 9 When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed. Print approximately three sheets for a test chart. 10 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 39
2.5 How to Operate the Both Sides Adj. Item 2 11 Check the lengths at points [2], [4], [6], and [8] on the second and third output charts. Be sure to make note of the measurement lengths. When the lengths at points [2], [4], [6], and [8] are within the respective ranges shown below, press [Close], - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 40
2.5 How to Operate the Both Sides Adj. Item 2 13 When the entry is completed, press [Adjustment Start]. 14 Output the front side adjustment chart again, then check the lengths at points [2], [4], [6], and [8] on the second and third output charts. Repeat steps 11 to 14 until the lengths at points - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 41
2.5 How to Operate the Both Sides Adj. Item 2 2.5.3 [Scan Meas.] Adjustment Adjust the magnification ratio and printing position of the back side with reference to the printing position of the front side. The magnification ratio and printing position of the back side are automatically adjusted by - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 42
2.5 How to Operate the Both Sides Adj. Item 2 2 Select the tray for the output background sheet, and then press [Output Background Sheet]. 3 Display the [PRINT MODE] screen for the background sheet, then press Start on the control panel. Check that the output is completed, then press [Exit - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 43
the top-left corner of the adjustment chart at a distance of about 2 inches (5 cm) each from the vertical size guide and horizontal size guide, and align the left and top edges parallel to the vertical size guide and horizontal size guide on the original glass. AccurioPress 6136/6136P/6120 2-18 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 44
. Item 2 % Set the black side of the background sheet face down (facing to the original glass), and fit it to the vertical size guide and horizontal size guide as shown below. In doing so, be careful not to shift the position of the adjustment chart that has previously been set. % Close the - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 45
start scanning. Close the ADF, and then press [Close] on the dialog. % You may see the message [Scanning adjustment chart failed]. Follow the instruction on the screen to correctly set the adjustment chart and background sheet, and then press [Close]. % When the screen below is displayed, press - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 46
2.5 How to Operate the Both Sides Adj. Item 2 ment results obtained so far, press [Yes]. Restart the scan measurement from the first scanning procedure. To continue the scan measurement, press [No]. AccurioPress 6136/6136P/6120 2-21 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 47
2.5 How to Operate the Both Sides Adj. Item 2 8 Repeat the scanning steps 6 and 7 four times for every adjustment chart. First time: Set the front side of the adjustment chart face up (turned away from the original glass), with its top edge positioned to the back side. Second time: Set the front - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 48
2.5 How to Operate the Both Sides Adj. Item 2 Fourth time: Set the back side of the adjustment chart face up (turned away from the original glass), with its bottom edge positioned to the back side. % When four times of scanning are completed, a dialog is displayed to calculate the adjustment - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 49
Chart Adjustment] - [Scan Meas.] adjustment The adjustment values are reflected on the [Rotate/Skew] screen. If necessary, you can adjust them manually. To manually adjust [Rotate/Skew], follow the steps below. The adjustment values specified in [Rotate/Skew] are retained for each tray. If the paper - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 50
2.5 How to Operate the Both Sides Adj. Item 2 Even if [Both Sides Rotate/Skew] is set to [Disable] when adjustment values are entered on the [Rotate/Skew] screen, adjustment value information is remained. Setting [Both Sides Rotate/Skew] to [Enable] allows you to make adjustments with the same - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 51
2.5 How to Operate the Both Sides Adj. Item 2 4 Enter an adjustment value in [Rotate] using the keypad on the screen or [,] or [+]. % Press [Rotate] under [Front] or [Back], and enter the numeric value. % To rotate the image counterclockwise, enter a positive value, and to rotate it clockwise, - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 52
2.5 How to Operate the Both Sides Adj. Item 2 5 Enter an adjustment value in [Skew] using the keypad on the screen or [,] or [+]. % Press [Skew] under [Front] or [Back], and enter the numeric value. % To adjust so that the right corner of the image lowers, enter a negative value. To adjust so that - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 53
2.5 How to Operate the Both Sides Adj. Item 2 1 Press [Paper Setting] on the [MACHINE] screen. 2 Press the tray you performed [Front] side adjustment for. 3 Press [Change Set]. AccurioPress 6136/6136P/6120 2-28 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 54
2.5 How to Operate the Both Sides Adj. Item 2 4 Press [Both Sides Adj.]. 5 Press [Gap], then press [Print Mode]. 6 When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed. Print approximately three sheets for a test chart. AccurioPress 6136/6136P/ - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 55
2.5 How to Operate the Both Sides Adj. Item 2 7 Press [Exit PrintMode]. 8 Measure the gap between the front and back sides at each point of [a] to [d] on the [back] side (Back) on the second and third output charts. The scale resolution is 0.5mm. The black line in the figure indicates the back - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 56
2.5 How to Operate the Both Sides Adj. Item 2 10 When the entry is completed, press [Adjustment Start]. The adjustment values you entered are applied to [Zoom] and [Image Shift] on the [Back] screen. 11 Press Start on the control panel. A test chart is printed. Print approximately three sheets - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 57
2.5 How to Operate the Both Sides Adj. Item 2 14 Press [OK] to finish the adjustment. When the gap adjustment is performed for paper of a new brand, weight, or size, press [Register & OK], then proceed to the next step. 2.5.6 [AutoMeasure] Adjustment Both sides of an adjustment chart output - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 58
2.5 How to Operate the Both Sides Adj. Item 2 1 Press [Both Sides] on the [MACHINE] screen. 2 Select a tray to load the target paper into, and press [AutoMeasure], and press [Print Mode]. 3 Enter the necessary number of adjustment charts, then press Start on the control panel. % Up to 20 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 59
2.5 How to Operate the Both Sides Adj. Item 2 5 The [AutoMeasure] screen is displayed, and each adjustment value on this screen is updated. % Print out one adjustment chart, and check it. 6 Press [Close]. Then, the [AutoMeasure] adjustment is completed. % For fine adjustment, perform the - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 60
2.5 How to Operate the Both Sides Adj. Item 2 1 Press [Paper Setting] on the [MACHINE] screen. 2 Select a tray, then press [Change Set]. 3 Press [Register & OK]. AccurioPress 6136/6136P/6120 2-35 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 61
2.5 How to Operate the Both Sides Adj. Item 2 4 Press [New Store]. 5 Enter the paper profile name and press [OK]. Enter the paper brand for the paper profile name. 6 Check that the paper profile name you entered is displayed, then press [Close] to end the registration task. AccurioPress 6136/ - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 62
2.5 How to Operate the Both Sides Adj. Item 2 2.5.8 Back Side Fine Adjustment This adjustment is useful when you want to adjust the magnification and position of the image on the back side based on the output result of the job data that is actually going to be used. 1 Output approximately three - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 63
2.5 How to Operate the Both Sides Adj. Item 2 4 Press [Both Sides Adj.]. 5 Press [Back]. AccurioPress 6136/6136P/6120 2-38 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 64
2.5 How to Operate the Both Sides Adj. Item 2 6 Check the magnification deviation on the back side from the image on the back side of each of the sec- ond and third output charts in the job output in step 1. Put the third output chart (with the back side facing upward) on the second one (with the - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 65
2.5 How to Operate the Both Sides Adj. Item 2 7 When the adjustment is completed, press [OK]. 8 Output approximately three sheets of the same job data as that output in step 1 from the same tray. 9 Check the magnification deviation using the second and third output charts. Repeat Step 6 to 8 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 66
2.5 How to Operate the Both Sides Adj. Item 2 12 Press [Both Sides Adj.]. 13 Check the position error on the back side from the image on the back side of each of the second and third output charts in the job output after the magnification adjustment has been completed. The black line in the - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 67
2.5 How to Operate the Both Sides Adj. Item 2 14 When the adjustment is completed, press [OK]. 15 Output approximately three sheets of the same job data as that output in step 1 from the same tray. 16 Check the misalignment of the image on the back side using the second and third output charts. - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 68
2.5 How to Operate the Both Sides Adj. Item 2 3 Change the settings as needed. Menu item [Periodical Both Sides Auto Adjustment] [Adjustment Interval] [Deviation Check] Description When data is printed out by the number of sheets specified in [Adjustment Interval], you can select whether to - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 69
2.5 How to Operate the Both Sides Adj. Item 2 AccurioPress 6136/6136P/6120 2-44 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 70
3 Quality Adjustment - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 71
3.1 Quality Adjustment for Image Controller 3 3 Quality Adjustment 3.1 Quality Adjustment for Image Controller To reproduce stable density, make quality adjustments as necessary, such as when changing the screen, stabilizing density, or using different paper. This machine provides the following - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 72
3.2 Regular adjustment flow (Standard) 3.2 Regular adjustment flow (Standard) 3.2.1 Adjustment timing - When between 1,000 and 2,000 sheets of paper have been output - Just before outputting a job based on the strict density standard - Others, such as when you cannot get the desired density This - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 73
) is mounted Adjustment order 1 2 3 4 Adjustment item Color Density Control setting check [Gamma Automatic Adjustment] [Max. Density Auto Adj.] [Color density manual control] Reference page 3-41 page 3-9 page 3-39 page 3-43 Tips - If you use [Package Color Auto Adj.], this machine automatically - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 74
RU-518) is mounted Adjustment order 1 2-a 2-b 3 Adjustment item [Gamma Automatic Adjustment] [Density Balance Auto. Adj.] [Density Balance Adjustment] [Color density manual control] Reference page 3-9 page 3-28 page 3-11 Reference page 3-9 page 3-28 page 3-11 page 3-43 Tips - If you use [Package - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 75
order 1 2 3-a 3-b 4 Adjustment item Custom Screen Setting [Gamma Automatic Adjustment] [Density Balance Auto. Adj.] [Density Balance Adjustment] [Color density manual control] Reference page 3-7 page 3-9 page 3-28 page 3-11 Reference page 3-7 page 3-9 page 3-28 page 3-11 page 3-43 Tips - If - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 76
3.6 Details of quality adjustment items 3 3.6 Details of quality adjustment items 3.6.1 Setting of the Custom Screen Using the touch panel on the machine, assign screens from the [Administrator Setting] menu. . Image quality adjustment flow and the position of this adjustment - In the pre-output - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 77
3.6 Details of quality adjustment items 3 3 Press [System Setting]. 4 Press [Expert Adjustment]. 5 Press [Quality Adjustment]. AccurioPress 6136/6136P/6120 3-8 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 78
3.6 Details of quality adjustment items 3 6 Press [Custom Screen]. 7 Press the screen to be assigned to each screen type: [Screen1], [Screen2], and [Stochastic]. After set- ting, press [OK]. 3.6.2 [Gamma Automatic Adj.] Performing [Gamma Automatic Adj.] This automatically adjusts the density - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 79
3.6 Details of quality adjustment items 3 Regular adjustment flow: Normal Regular adjustment flow: High Precision - (None) - (None) This adjustment Maximum Density Adjustment 1 On the touch panel of the main body, press [Adjustment] on the [MACHINE] screen. The [Adjustment Menu] is displayed. - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 80
3.6 Details of quality adjustment items 3 3 Press [Start]. After adjustment was completed, press [Return]. When the message in the upper left of the screen changes from [Now adjusting] to [Completed], adjustment is completed. 4 Press [Exit [ADJUSTMENT]]. 3.6.3 [Density Balance Adjustment] - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 81
Web site. After installing the tool, restart the computer. ProfileMaker 5 v5.0.10: - https://xritephoto.com/ph_product_overview.aspx?ID=757&Action=Support&SoftwareID=931 To use the spectrophotometer, i1iSisXL, perform Step 10 (select [Chart] from the menu) followed by the procedure of ". For - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 82
3.6 Details of quality adjustment items 3 3 Press [Density Balance Chart Output]. 4 Select the chart to be output according to the spectrophotometer to be used. After the selection, press [Print Mode]. 5 Set the paper on the [PRINT MODE] screen and press Start on the Control panel. The chart is - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 83
3.6 Details of quality adjustment items 3 7 When the following message is displayed, click [OK]. 8 Connect the instrument to the computer. From the menu, click [Device/Port]. The [Instrument Configuration] screen is displayed. 9 In [Instrument], select the spectrophotometer to use. When [OK] is - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 84
3.6 Details of quality adjustment items 3 10 From the menu, click [Chart]. % The subsequent operations are described for the case where the spectrophotometer i1Pro2 is used. For measurement using the spectrophotometer i1iSisXL, refer to ". For the spectrophotometer i1iSisXL". 11 From [Test Chart - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 85
3.6 Details of quality adjustment items 3 12 Specify [Rows] and [Columns], and click [OK]. % [Rows] = 4, [Columns] = 6 13 Click [Start]. 14 When the following message is displayed, horizontally place the spectrophotometer on the calibration dock and click [OK]. AccurioPress 6136/6136P/6120 3- - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 86
3.6 Details of quality adjustment items 3 15 Stack 10 sheets of blank paper whose type is the same as that of the paper where chart has been print- ed, and place the printed chart on top of it. % To eliminate the influence of the color of the table, place 10 sheets of paper of the same type as the - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 87
3.6 Details of quality adjustment items 3 17 Continuously, place the spectrophotometer on the next right patch, and press the button for the spec- trophotometer. Measure all the patches in the same operation. % If you place the spectrophotometer on the wrong place (patch), click the the previous - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 88
according to the paper size, and click [Open]. There are some script data items particular for each chart size or type. For details, contact your service representative. AccurioPress 6136/6136P/6120 3-19 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 89
3.6 Details of quality adjustment items 3 3 On the following screen, click [Start]. 4 When the following message is displayed, insert the chart into i1iSisXL. % Cut off the left side of the chart using scissors or such other tools so that the length between the left end of the chart and the black - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 90
3.6 Details of quality adjustment items 3 Saving the measured data of the density balance You can save the data of the density balance measured with the spectrophotometer to a USB device such as a USB memory stick or to the computer on the network used by the machine. 1 From the [File] menu, - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 91
3.6 Details of quality adjustment items 3 Registering the adjusted value of the density balance in the machine You can register the measured data (adjusted value of the density balance) saved in the USB memory or the computer on the network in the machine. Place to save measured data Measured - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 92
3.6 Details of quality adjustment items 3 3 Press [Density Balance Data Reg/Del]. 4 Select the number where the adjusted value is to be registered and press [USB Flash Drive]. % If you select the registered number, the adjusted value is overwritten. 5 The following screen is displayed. Connect - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 93
3.6 Details of quality adjustment items 3 6 Select the file name of the measured data to be registered and press [OK]. 7 When the following screen is displayed, press [OK]. The adjusted value of the density balance is registered. . Registering the measured data saved in the computer on the - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 94
3.6 Details of quality adjustment items 3 2 In the URL field, enter "http://IP address of the machine (or the host name):30091" and press the Enter key. The main page of the Web Utilities is displayed. 3 Click on [Machine Manager Setting]. 4 Enter the [User Name] and [Password] and click [OK]. - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 95
3.6 Details of quality adjustment items 3 5 Click on [ColorMeasuring data Input]. 6 Specify the [File Name] and [File Path] and click [Upload]. % Enter the file name (example: 202131351193CE_i1pro2_2017xxxx.txt). % Click [Browse] of the [File Path] and select the measured data saved in the - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 96
3.6 Details of quality adjustment items 3 8 Press [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Quality Adjustment] - [Density Balance Adjustment] in sequence. 9 Press [Density Balance Data Reg/Del]. 10 Select the number where the adjusted value is to be registered and - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 97
3.6 Details of quality adjustment items 3 11 Select the file name of the measured data to be registered and press [OK]. 12 When the following screen is displayed, press [OK]. The adjusted value of the density balance is registered. 3.6.4 [Density Balance Auto. Adj.] This adjustment has the - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 98
3.6 Details of quality adjustment items 3 Output density balance charts from the machine, and automatically adjust the density balance using Intelligent Quality Optimizer IQ-501. 1 Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen. 2 Press [Quality Adjustment] and - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 99
3.6 Details of quality adjustment items 3 5 Press [)] on the right side of [Screen Pattern] to display the desired screen. % If necessary, you can press [Screen Pattern] to display the [Screen Pattern] screen and select any screen. Select a screen, and press [OK]. % Press [Close] on the [Quality - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 100
3.6 Details of quality adjustment items 3 7 Press Start on the control panel. Charts are output, and the [Density Balance Auto. Adjustment Result] screen is displayed. 8 Press [Return] to return to the [Quality Adjustment Menu] screen. When Intelligent Quality Optimizer IQ-501 is not provided ( - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 101
3.6 Details of quality adjustment items 3 3 Press [Output Chart]. 4 Press [Quality Adj.]. AccurioPress 6136/6136P/6120 3-32 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 102
3.6 Details of quality adjustment items 3 5 Press [)] on the right side of [Screen Pattern] to display the desired screen. % If necessary, you can press [Screen Pattern] to display the [Screen Pattern] screen and select any screen. Select a screen, and press [OK]. % Press [Close] on the [Quality - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 103
test chart to the back, then face the print side downward. % Take the test chart away from the vertical size guide by 2 inches (5 cm), then push it against the horizontal size guide to load the test chart. % Place about 10 sheets of blank copy paper on the test chart. % Close the ADF - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 104
of the test chart forward, then face the print side downward. % Take the test chart away from the vertical size guide by 2 inches (5 cm), then push it against the horizontal size guide to load the test chart. % Place about 10 sheets of blank copy paper on the test chart. % Close the ADF - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 105
3.6 Details of quality adjustment items 3 11 Press [Start] on the screen. The second scan is carried out, and the density balance adjustment value is registered. 12 When the adjustment is completed normally, the adjustment value is automatically registered, and the screen shown below is displayed - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 106
-501 or Relay Unit RU-518 is mounted, we recommend you to first perform [Maximum Density Auto Adjustment]. Be sure to perform Color Density Manual Control after changing the maximum density. This section describes how to make adjustments when Intelligent Quality Optimizer IQ-501 is provided. 1 Press - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 107
and Relay Unit RU-518 is not mounted, print charts using the pre-specified paper, and measure the density using your spectrophotometer. Then, manually repeat adjustments until the target result is obtained. After adjustment, proceed to step 7. 5 After outputting the charts, the screen returns to the - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 108
using paper other than a registered paper, you need to register a desired density again. For details, contact your service representative. Be sure to perform Color Density Manual Control after changing the maximum density. Tips - After Max. Density Auto Adj., the paper profile used for automatic - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 109
3.6 Details of quality adjustment items 3 3 Press [Print Mode]. 4 Load paper used to register a desired density in a tray. The paper profile for the tray automatically changes to the one used for registering a desired density. 5 Select a tray into which paper is loaded, and press [OK]. 6 Press - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 110
control and set the execution timing, etc. When using the color density control function (Adjustment of color sensor for each paper type / Color density manual control), always set the [Use Color Density Control] to [ON]. 1 On the touch panel of the main body, press [Adjustment] on the [MACHINE - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 111
3.6 Details of quality adjustment items 3 2 Press [Quality Adjustment] on the [Adjustment Menu]. 3 Press [Color Density Control]. 4 Press [Basic Setting]. AccurioPress 6136/6136P/6120 3-42 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 112
]. 6 Press [OK]. 7 Press [Close]. 8 Press [Exit [ADJUSTMENT]]. The auto adjustment is set up. A chart is printed out periodically, and calibration is executed automatically. 3.6.8 [Color density manual control] You can manually adjust the color density. AccurioPress 6136/6136P/6120 3-43 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 113
3.6 Details of quality adjustment items 3 1 On the touch panel of the main body, press [Adjustment] on the [MACHINE] screen. The [Adjustment Menu] is displayed. 2 Press [Quality Adjustment] on the [Adjustment Menu]. 3 Press [Color Density Control]. AccurioPress 6136/6136P/6120 3-44 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 114
3.6 Details of quality adjustment items 3 4 Press the [Color Density Manual Control] of [Expert Setting]. 5 Press [Print Mode]. 6 On the PRINT MODE screen, press [Quality Adj.]. AccurioPress 6136/6136P/6120 3-45 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 115
panel. % To set the output tray, press [Output Setting] at the upper right of the PRINT MODE screen. 9 When the chart is output, the manual control is completed. 3.6.9 [Package Color Auto Adj.] Automatically adjust colors collectively. This menu item is to be displayed on the machine mounted with - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 116
3.6 Details of quality adjustment items 3 3 Before making adjustments, you can press [Initial Set.] to change adjustment settings as needed. 4 Change any setting ([Screen of Adjustment Target], [Additional Adjustment], [Maximum Density Adjust- ment Tray], or [Adjustment Tray]). % You can press [ - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 117
3.6 Details of quality adjustment items 3 6 When the adjustment is completed, the adjustment result is displayed. AccurioPress 6136/6136P/6120 3-48 - Konica Minolta AccurioPress 6120 | AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 118
© 2018 2018. 3