Home » Konica Minolta Manuals » Printers » Konica Minolta AccurioPress 6120 » Manual Viewer

Konica Minolta AccurioPress 6120 AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 30

Periodical Both Sides Adjustment Function, Regular adjustment flow

View all Konica Minolta AccurioPress 6120 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

2.3 Regular adjustment flow 2 2.3.3 Periodical Both Sides Adjustment Function Intelligent Quality Optimizer IQ-501 provides the [Periodical Both Sides Adjustment] function that automatically performs the periodical both-sides adjustment. The [Periodical Both Sides Adjustment] function makes the both-sides adjustment each time the specified number of sheets of data are printed. The following chart is output, and it is read by Intelligent Quality Optimizer IQ-501 to correct an image misalignment. When adjustment is completed, the job is restarted automatically, so you do not need to manually perform job operations. The chart used for adjustment is output to a different tray from that used for a job. The adjustment result is applied after data has been output onto a few to a dozen sheets following the chart. If necessary, you can change the adjustment interval value or misalignment value depending on the machine environment or other conditions. For details, refer to page 2-42. Tips - When using [Periodical Both Sides Adjustment], manually make the image quality adjustment. The mark is printed on the chart to enable you to know from which paper tray the target job is printed. AccurioPress 6136/6136P/6120 2-5

Section	Page
Table of contents	4
1 Daily Care	7
1.1 Daily Cleaning	7
Care timing	7
Care requirements	7
1.2 Weekly Cleaning	8
Care timing	8
Care requirements	8
1.3 Cleaning the Scanning Area	9
1.4 Cleaning the Fusing Unit	11
1.5 Cleaning the Duplex Part	14
1.6 Cleaning the Output Unit	20
1.7 Cleaning the Paper Feed Unit	23
2 Both Sides Adjust	27
2.1 What is Both Sides Adjust?	27
2.2 Adjustment flow to use paper of a new brand, weight, or size	28
2.2.1 Adjustment Timing	28
2.2.2 Adjustment Order	28
2.3 Regular adjustment flow	29
2.3.1 Adjustment Timing	29
2.3.2 Adjustment Order	29
2.3.3 Periodical Both Sides Adjustment Function	30
2.4 Adjustment flow for each job	31
2.4.1 Adjustment Timing	31
2.4.2 Adjustment Order	31
2.5 How to Operate the Both Sides Adj. Item	32
2.5.1 Fine-adjusting the gap between side guide plates of Paper Feed Unit PF-710	32
2.5.2 [Front] Adjustment	36
2.5.3 [Scan Meas.] Adjustment	41
2.5.4 [Rotate/Skew] Adjustment	49
2.5.5 [Gap] Adjustment (Back side adjustment)	52
2.5.6 [AutoMeasure] Adjustment	57
2.5.7 Registering Paper Profile	59
2.5.8 Back Side Fine Adjustment	62
2.5.9 [Periodical Both Sides Adj.]	67
3 Quality Adjustment	71
3.1 Quality Adjustment for Image Controller	71
3.2 Regular adjustment flow (Standard)	72
3.2.1 Adjustment timing	72
3.2.2 Adjustment sequence	72
3.3 Regular adjustment flow (High accuracy)	73
3.3.1 Adjustment Timing	73
3.3.2 Adjustment Order	73
3.4 Adjustment flow to use a new type of paper	74
3.4.1 Adjustment timing	74
3.4.2 Adjustment sequence	74
3.5 Adjustment Flow when changing the screen	75
3.5.1 Adjustment timing	75
3.5.2 Adjustment sequence	75
3.6 Details of quality adjustment items	76
3.6.1 Setting of the Custom Screen	76
3.6.2 [Gamma Automatic Adj.]	78
Performing [Gamma Automatic Adj.]	78
3.6.3 [Density Balance Adjustment]	80
Adjustment flow when changing the screen	80
Saving the measured data of the density balance	90
Registering the adjusted value of the density balance in the machine	91
3.6.4 [Density Balance Auto. Adj.]	97
3.6.5 [Maximum Density Adjustment]	106
3.6.6 [Max. Density Auto Adj.]	108
3.6.7 Checking the Color Density Control Setting	110
3.6.8 [Color density manual control]	112

Match case Limit results 1 per page

AccurioPress 6136/6136P/6120

2-5

2.3

Regular adjustment flow

2.3.3

Periodical Both Sides Adjustment Function

Intelligent Quality Optimizer IQ-501

provides the [Periodical Both Sides Adjustment] function that automat-

ically performs the periodical both-sides adjustment.

The [Periodical Both Sides Adjustment] function makes the both-sides adjustment each time the specified

number of sheets of data are printed.

The following chart is output, and it is read by

Intelligent Quality Optimizer IQ-501

to correct an image mis-

alignment.

When adjustment is completed, the job is restarted automatically, so you do not need to manually perform

job operations. The chart used for adjustment is output to a different tray from that used for a job.

The adjustment result is applied after data has been output onto a few to a dozen sheets following the chart.

If necessary, you can change the adjustment interval value or misalignment value depending on the machine

environment or other conditions.

For details, refer to page 2-42.

Tips

When using [Periodical Both Sides Adjustment], manually make the image quality adjustment.

The

mark is printed on the chart to enable you to know from which paper tray the target job is printed.