Konica Minolta AccurioPress 6120 AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 11
Cleaning the Fusing Unit, CAUTION
View all Konica Minolta AccurioPress 6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
1.4 Cleaning the Fusing Unit 1 1.4 Cleaning the Fusing Unit If the fusing unit is dirty, follow the steps below to clean it. Check the cleaning locations before turning the main body on every day. 7CAUTION - Always check the cleaning locations before turning the main body on. - If the power is turned on while the main body doors are closed, the fusing unit may become hot and you may be burned when cleaning around the fusing unit. NOTICE When cleaning, exercise care to prevent any dirt from falling into the paper feed route. 1 Open the front door of the main body and the left side door of the main body. 2 Turn ON the main power switch, and turn ON the sub power switch. 3 Lower the lever [M4] clockwise. 4 Hold the lever [M4], and pull out the duplex part. AccurioPress 6136/6136P/6120 1-6