Konica Minolta AccurioPress 6120 AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 103
Details of quality adjustment items, Start, control panel, Original Glass, vertical size guide
View all Konica Minolta AccurioPress 6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
3.6 Details of quality adjustment items 3 7 Press Start on the control panel. Charts are output, and the [Density Balance Auto. Adjustment] screen is displayed. 8 Load the output test chart on the Original Glass as shown in the example on the screen. % Turn the arrow mark of the test chart to the back, then face the print side downward. % Take the test chart away from the vertical size guide by 2 inches (5 cm), then push it against the horizontal size guide to load the test chart. % Place about 10 sheets of blank copy paper on the test chart. % Close the ADF. 9 Press [Start] on the screen. The first scan is carried out. AccurioPress 6136/6136P/6120 3-34
3.6
Details of quality adjustment items
3
AccurioPress 6136/6136P/6120
3-34
7
Press
Start
on the
control panel
.
Charts are output, and the [Density Balance Auto. Adjustment] screen is displayed.
8
Load the output test chart on the
Original Glass
as shown in the example on the screen.
%
Turn the arrow mark of the test chart to the back, then face the print side downward.
%
Take the test chart away from the
vertical size guide
by 2 inches (5 cm), then push it against the
horizontal size guide
to load the test chart.
%
Place about 10 sheets of blank copy paper on the test chart.
%
Close the
ADF
.
9
Press [Start] on the screen.
The first scan is carried out.