Konica Minolta AccurioPress 6120 AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 40
& OK], then proceed to the next step.
View all Konica Minolta AccurioPress 6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2.5 How to Operate the Both Sides Adj. Item 2 13 When the entry is completed, press [Adjustment Start]. 14 Output the front side adjustment chart again, then check the lengths at points [2], [4], [6], and [8] on the second and third output charts. Repeat steps 11 to 14 until the lengths at points [2], [4], [6], and [8] are included in the respective ranges shown below. [2]: 200 mm ^ 0.3 mm [4]: 200 mm ^ 0.3 mm [6]: 200 mm ^ 0.3 mm [8]: 200 mm ^ 0.3 mm 15 Press [OK] to finish the adjustment. When the front side adjustment is performed for paper of a new brand, weight, or size, press [Register & OK], then proceed to the next step. AccurioPress 6136/6136P/6120 2-15
AccurioPress 6136/6136P/6120
2-15
2.5
How to Operate the Both Sides Adj. Item
2
13
When the entry is completed, press [Adjustment Start].
14
Output the front side adjustment chart again, then check the lengths at points [2], [4], [6], and [8] on the
second and third output charts.
Repeat steps 11 to 14 until the lengths at points [2], [4], [6], and [8] are included in the respective ranges
shown below.
[2]: 200 mm
^
0.3 mm
[4]: 200 mm
^
0.3 mm
[6]: 200 mm
^
0.3 mm
[8]: 200 mm
^
0.3 mm
15
Press [OK] to finish the adjustment.
When the front side adjustment is performed for paper of a new brand, weight, or size, press [Register
& OK], then proceed to the next step.