Home » Konica Minolta Manuals » Printers » Konica Minolta AccurioPress 6120 » Manual Viewer

Konica Minolta AccurioPress 6120 AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 48

After pressing [Yes], output a sheet of the adjustment chart to confirm the result. If readjustment is

View all Konica Minolta AccurioPress 6120 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

2.5 How to Operate the Both Sides Adj. Item 2 Fourth time: Set the back side of the adjustment chart face up (turned away from the original glass), with its bottom edge positioned to the back side. % When four times of scanning are completed, a dialog is displayed to calculate the adjustment value. 9 Select whether to continue the scan measurement or to finish the scan measurement and calculate the adjustment value. To continue the scan measurement, press [No]. To finish the scan measurement and calculate the adjustment value, press [Yes]. % Pressing [No] returns to the [Scan Adjustment Chart] screen on which the counter of [Chart Sheets] is added by one. Repeat steps 6 to 8 for the number of adjustment charts. The measurement results will be added up. This operation can be repeated up to 20 times. % Pressing [Yes] automatically calculates the adjustment value from the added measurement results and reflects it on [Zoom] and [Image Shift] or [Rotate/Skew] to be specified for [Back]. [Rotate/Skew] may be reflected to both of [Front] and [Back]. After pressing [Yes], output a sheet of the adjustment chart to confirm the result. If readjustment is needed, repeat steps 4 to 9. % If the adjustment value calculated by pressing [Yes] exceeds the adjustment range, the following dialog is displayed. Press [Close] to discard the measurement results, and restart the scan measurement from the beginning. Possible causes to exceed the adjustment range may include that the chart used in the scan measurement is incorrect (a different chart has been used), the printing position of the front side has been AccurioPress 6136/6136P/6120 2-23

Section	Page
Table of contents	4
1 Daily Care	7
1.1 Daily Cleaning	7
Care timing	7
Care requirements	7
1.2 Weekly Cleaning	8
Care timing	8
Care requirements	8
1.3 Cleaning the Scanning Area	9
1.4 Cleaning the Fusing Unit	11
1.5 Cleaning the Duplex Part	14
1.6 Cleaning the Output Unit	20
1.7 Cleaning the Paper Feed Unit	23
2 Both Sides Adjust	27
2.1 What is Both Sides Adjust?	27
2.2 Adjustment flow to use paper of a new brand, weight, or size	28
2.2.1 Adjustment Timing	28
2.2.2 Adjustment Order	28
2.3 Regular adjustment flow	29
2.3.1 Adjustment Timing	29
2.3.2 Adjustment Order	29
2.3.3 Periodical Both Sides Adjustment Function	30
2.4 Adjustment flow for each job	31
2.4.1 Adjustment Timing	31
2.4.2 Adjustment Order	31
2.5 How to Operate the Both Sides Adj. Item	32
2.5.1 Fine-adjusting the gap between side guide plates of Paper Feed Unit PF-710	32
2.5.2 [Front] Adjustment	36
2.5.3 [Scan Meas.] Adjustment	41
2.5.4 [Rotate/Skew] Adjustment	49
2.5.5 [Gap] Adjustment (Back side adjustment)	52
2.5.6 [AutoMeasure] Adjustment	57
2.5.7 Registering Paper Profile	59
2.5.8 Back Side Fine Adjustment	62
2.5.9 [Periodical Both Sides Adj.]	67
3 Quality Adjustment	71
3.1 Quality Adjustment for Image Controller	71
3.2 Regular adjustment flow (Standard)	72
3.2.1 Adjustment timing	72
3.2.2 Adjustment sequence	72
3.3 Regular adjustment flow (High accuracy)	73
3.3.1 Adjustment Timing	73
3.3.2 Adjustment Order	73
3.4 Adjustment flow to use a new type of paper	74
3.4.1 Adjustment timing	74
3.4.2 Adjustment sequence	74
3.5 Adjustment Flow when changing the screen	75
3.5.1 Adjustment timing	75
3.5.2 Adjustment sequence	75
3.6 Details of quality adjustment items	76
3.6.1 Setting of the Custom Screen	76
3.6.2 [Gamma Automatic Adj.]	78
Performing [Gamma Automatic Adj.]	78
3.6.3 [Density Balance Adjustment]	80
Adjustment flow when changing the screen	80
Saving the measured data of the density balance	90
Registering the adjusted value of the density balance in the machine	91
3.6.4 [Density Balance Auto. Adj.]	97
3.6.5 [Maximum Density Adjustment]	106
3.6.6 [Max. Density Auto Adj.]	108
3.6.7 Checking the Color Density Control Setting	110
3.6.8 [Color density manual control]	112

Match case Limit results 1 per page

AccurioPress 6136/6136P/6120

2-23

2.5

How to Operate the Both Sides Adj. Item

Fourth time: Set the back side of the adjustment chart face up (turned away from the

original glass

with its bottom edge positioned to the back side.

When four times of scanning are completed, a dialog is displayed to calculate the adjustment value.

Select whether to continue the scan measurement or to finish the scan measurement and calculate the

adjustment value.

To continue the scan measurement, press [No].

To finish the scan measurement and calculate the adjustment value, press [Yes].

Pressing [No] returns to the [Scan Adjustment Chart] screen on which the counter of [Chart Sheets]

is added by one. Repeat steps 6 to 8 for the number of adjustment charts. The measurement results

will be added up. This operation can be repeated up to 20 times.

Pressing [Yes] automatically calculates the adjustment value from the added measurement results

and reflects it on [Zoom] and [Image Shift] or [Rotate/Skew] to be specified for [Back].

[Rotate/Skew] may be reflected to both of [Front] and [Back].

After pressing [Yes], output a sheet of the adjustment chart to confirm the result. If readjustment is

needed, repeat steps 4 to 9.

If the adjustment value calculated by pressing [Yes] exceeds the adjustment range, the following

dialog is displayed. Press [Close] to discard the measurement results, and restart the scan meas-

urement from the beginning.

Possible causes to exceed the adjustment range may include that the chart used in the scan meas-

urement is incorrect (a different chart has been used), the printing position of the front side has been