Konica Minolta Kodak i620 User Guide - Page 34
Replace the output tray., If the ribbon cable should become disconnected, snap
View all Konica Minolta Kodak i620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
6. Press and hold the release tab on the bottom of the printer carrier and rotate the printer carrier back into position. NOTE: If the ribbon cable should become disconnected, snap it back into position. 7. Slide the printer carrier into the desired position matching the arrow on the printer carrier with the detent position. 8. Replace the output tray. 9. Run a print test. 4-6 A-61500 April 2007
4-6
A-61500
April 2007
6.
Press and hold the release tab on the bottom of the printer carrier
and rotate the printer carrier back into position.
NOTE:
If the ribbon cable should become disconnected, snap it
back into position.
7.
Slide the printer carrier into the desired position matching the arrow
on the printer carrier with the detent position.
8.
Replace the output tray.
9.
Run a print test.