Konica Minolta bizhub 283 bizhub 423/363/283/223 Network Scan/Fax/Network Fax - Page 309

13.5 Fax Glossary 13 Term PB PC-FAX Polling Program Quick Memory TX Receiving Redial Reference Allowed Level Relay broadcast Relay distribution station Relay instruction station Resending Resolution Scan Size Sender Fax No. Sender Name Sending Sharpness Sub-scanning direction Super G3 (SG3) Temporary forward transmission Timer TX Description A push telephone line. A function to send a fax directly from a computer without using paper. A function available on the receiver's side to request a sender to send documents set or stored in the sender's machine or memory. A function of registering frequently used destination fax numbers, or stereotyped transmission operation procedures. By simply pressing Mode Memory, you can specify the destination, or configure a function automatically to start communication. A method to start sending fax immediately after scanning a page of the document. This method allows even a document with many pages to be sent without overflowing memory. A fax machine status where it receives a call. A function of dialing a fax number again, when recipient's line is busy, after waiting for a specified length of time. Both manual redial and automatic redial functions are available to select. A feature for specifying settings so that only certain people are able to view certain destination information for the security of the information. When synchronized with user authentication, only information with an access permission level matching that specified for the user can be viewed. A function to broadcast fax messages via other fax machine (called a relay distribution station). When you have multiple broadcast destinations in remote place, you may configure one of the destinations as a relay station to transfer the broadcast via the relay station, so that you can reduce the total communication rate. A fax machine that sends faxes to relaying destinations upon request for relay issued from a relay instruction station. A fax machine sending a relay broadcast request. A function of selecting and resending the document that was previously failed to send and stored in the memory. The document can be resent either to the same destination or to the other destination. The granularity for scanning documents. The larger the value of resolution, the finer the image quality is, consequently, it takes longer to transmit (transmission time). Select the level of resolution according to your requirements. A function to specify the scanning size of a document to transmit it. If the width of the paper in the recipient's fax machine is smaller than that of the transmitted document, the document is usually reduced for printing. If you do not want to reduce the document size, specify the same document size as that of the paper in the recipient's fax machine, so that you can send the document with its original size. An identification code used for the mutual recognition for fax transmission. Usually the fax number is registered for the fax ID. The name of a sender. On the receiver's side, the name is printed as a part of the sender's information at the edge of the transmitted document. Sending indicates making a call. For fax, sending indicates sending documents or dialing for pollings. A function to enhance the edge of characters before sending the document. The vertical direction for scanning documents. A G3 communication mode complying with ITU-T V.34. Compared with usual G3 communication, it allows the higher rate transmission (up to 33,600bps). A function of manually forwarding the received document that is standby for output, by using the setting check button on the control panel. The function must be set while the fax/scan screen is displayed, or the operation is halted because of paper misfeed or running out of paper. A function of transmitting a fax at the specified time. It is used to save cost by transmitting faxes late evening or early morning when discount telephone service is available. bizhub 423/363/283/223 13-14