Konica Minolta bizhub PRESS C71hc bizhub PRESS C1060/C1070/C1070P/PRO C1060L D - Page 25
Start, control, panel
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
8 When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed out. NOTICE Output about 3 sheets. 9 Press [Exit Print Mode]. bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 10 Measure the back side image difference at each point from [a] to [d] that is positioned at the [back] side of the >D@ second and third output charts. - The scale resolution is 0.5 mm. EDFN - The black line in the figure shows the back side, and the blue dashed line shows the other side (front side). - The measurement value can be entered in units of up to 0.1 mm. - For example, as this figure shows, when the black line at the back side is shifted by 1.5 mm to the plus direction than the blue dashed line at the front side, input -1.5 and correct the difference. Then, the black line at the back side 1.5 mm is moved to the minus direction. - Write down the measured values so that you do not forget them. 2 \ [ 2-14