Konica Minolta bizhub PRESS C71hc bizhub PRESS C1060/C1070/C1070P/PRO C1060L D - Page 72
Change the adjustment value according
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
21 Change the adjustment value according to the comparative result of the calculated value and the maximum density target value. Tips The change value of density differs according to the paper. Reference: The change value of density for POD gloss coat 128g/m2 · Y: '0.006/step · M: '0.01/step · C: '0.013/step · K: '0.01/step 22 Press [OK]. 23 Press [Exit [ADJUSTMENT]]. Wait for the display "Now adjusting" to disappear. 24 Output the same job data as step 2 from the same tray. 25 Measure all the maximum density patches of each color in the order of K, C, M, Y. Repeat the adjustment from step 18 to step 25 until the maximum density is within the acceptable target density range. Acceptable target density range: Y, M, C: from -5% to +5%, K: from -5% to +10% 3-40