Konica Minolta bizhub PRESS C71hc bizhub PRESS C1060/C1070/C1070P/PRO C1060L D - Page 45
bizhub PRO C1060L, bizhub PRESS C1070/C1070P/C1060, i1Pro2/ES-2000
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L 20 Stack 10 sheets of blank paper whose type is the same as that of the paper where chart has been printed, and place the printed chart on top of it. 21 When the following screen is displayed, place the spectrophotometer on the patch at the top in the upper left, and press the button for the spectrophotometer. When beep sounds, check that the read patch is displayed on the screen. Tips For i1Pro2/ES-2000, install the positioning target to the spectrophotometer before you measure the color. 22 Continuously, place the spectrophotometer on the next right patch, and press the button for the spectrophotometer. Measure all the patches in the same operation. - If you place the spectrophotometer on the wrong place (patch), click the button to go back to the previous patch position. - The white portion where it is displayed that nothing is printed is also part of the patch. Do not forget to measure it. If not measured, an error will occur. 23 When you are finished with the chart measurement, click [Close]. 3 3-13