Konica Minolta bizhub PRESS C71hc bizhub PRESS C1060/C1070/C1070P/PRO C1060L D - Page 76
Likewise, measure rows B to E.
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
14 When the following message is displayed, click [OK]. 15 Carry out the measurement in sequence from row A. - Hold down the side button of i1Pro/i1Pro2 or FD-5BT. When "bleep" sounds, slide i1Pro/i1Pro2 or FD-5BT while holding down the side button. Slide the spectrophotometer to the opposite side, then release the side button. - For details about how to use i1Pro/i1Pro2 or FD-5BT, refer to the manual supplied with the spectrophotometer. Tips For FD-5BT, use the FD-5BT after you release the lock lever of the target mask and remove the target mask. 16 Likewise, measure rows B to E. The measured parts are color-displayed on the screen in the same way as for the chart. 17 After you finish the chart measurement, click [Register]. NOTICE Unregistered calibration data is erased when Color Centro is closed. 3-44