Konica Minolta bizhub PRESS C71hc bizhub PRESS C1060/C1070/C1070P/PRO C1060L D - Page 68
FD-5BT
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
)Maximum Density Adjustment (for FD-5BT) NOTICE Check the maximum density target value that is informed from the service representative. Perform the Maximum Density Adjustment using the paper for the maximum density management that has been decided in consultation with the service representative. 1 Place the paper for the maximum density management that has been decided in consultation with the service representative. 2 Output the job data that includes the maximum density patch (density: 255) of Y, M, C, and K from the tray that the sheet for the maximum density management is placed. NOTICE The job that the patches of Y, M, C, and K (5 each, 20 in total) are arranged entirely on the paper is recommended. Select [Screen 1(Dot190)] from [Imaging] in the print driver to output the job data. 3 Activate the power of FD-5BT. 4 Use the up down move button on the home screen, and move the cursor to [Sheet] or [Sample]. 5 Press the OPTION button and the option screen is displayed. 3-36