Konica Minolta bizhub PRESS C71hc FD-9 Auto Scan Spectrophotometer User Guide - Page 16
Attaching/Removing Auto Sheet Feeder FD-A09 (optional accessory), Attaching
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Preparations ❙❙Attaching/Removing Auto Sheet Feeder FD-A09 (optional accessory) The optional Auto Sheet Feeder FD-A09 can automatically feed a stack of test charts into the FD-9. Up to 100 test charts can be placed in the Auto Sheet Feeder, and they will be automatically fed into the FD-9 one by one to be scanned. Attaching • If the Paper Guide is attached to the FD-9, remove it before proceeding. See p. 13. 1 Unplug all cords and cables (AC adapter power cord, USB cable, LAN cable) from the FD-9. 2 While holding the cover of the FD-9 closed, tilt the FD-9 back so that it rests on its back side. 3 Push down on the tab of the Auto Sheet Feeder connector cover, pull the cover open, and remove it. • Please store the cover carefully so that it will not be lost or broken. 4 Return the FD-9 to the normal upright orientation. 5 Place the Auto Sheet Feeder FD-A09 on a flat surface. 6 Lift the FD-9 up, align the Auto Sheet Feeder alignment holes on the bottom of the FD-9 with the alignment pegs on the Auto Sheet Feeder, and slowly lower the FD-9 straight down onto the Auto Sheet Feeder until it clicks in place. 14