Konica Minolta bizhub PRESS C71hc FD-9 Auto Scan Spectrophotometer User Guide - Page 3
Safety Precautions, WARNING, CAUTION
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Safety Precautions To ensure correct use of this instrument, read the following points carefully and adhere to them. After you have read this manual, keep it in a safe place where it can be referred to anytime a question arises. WARNING Failure to adhere to the following points may result in death or serious injury. Do not use the instrument in places where flammable or combustible gases (gasoline, etc.) are present. Doing so may cause a fire. Always use the AC adapter supplied as a standard accessory or the optional AC adapter, and connect it to an AC outlet of the rated voltage and frequency. If an AC adapter other than those specified by KONICA MINOLTA is used, it may result in damage to the unit, fire or electric shock. If the instrument will not be used for a long time, disconnect the AC adapter plug from the AC outlet. Accumulated dirt or water on the prongs of the AC adapter's plug may cause a fire and should be removed. Do not forcibly bend, twist, or pull the AC adapter power cable. Do not scratch or alter the power cable or place heavy objects on it. Doing so may damage the power cable and cause a fire or electric shock. Insert the power plug fully and securely. Incomplete inserting may cause fire or electric shock. Do not disassemble or modify the instrument or the AC adapter. Doing so may cause a fire or electric shock. Take special care not to allow liquid or metal objects to enter the instrument. Doing so may cause a fire or electric shock. Should liquid or metal objects enter the instrument, turn the power off immediately, disconnect the AC adapter plug from the AC outlet, and contact the nearest Konica Minolta-authorized service facility. The instrument should not be operated if it is damaged or the AC adapter is damaged, or if smoke or odd smells occur. Doing so may cause a fire. In such situations, turn the power off immediately, disconnect the AC adapter plug from the AC outlet and contact the nearest Konica Minolta-authorized service facility. Always hold the plug itself when disconnecting the AC adapter plug from the AC outlet. Pulling on the power cable may damage it and cause a fire or electric shock. Do not insert or disconnect the AC adapter plug from an AC outlet with wet hands. Doing so may cause electric shock. CAUTION Failing to adhere to the following points may result in injury or damage to the instrument or other property. Do not place the instrument on an unstable or sloping surface. Doing so may result in its falling or overturning, causing injury. Be careful not to drop the instrument when carrying it. Do not open the cover during scanning. If the cover is opened during scanning, there is a risk that your hand might get caught in the instrument, resulting in injury. Make sure that the AC outlet is located near the instrument and that the AC adapter plug can be connected to and disconnected from the AC outlet easily. When cleaning, disconnect the power plug. Cleaning with the power plug connected may result in electric shock. 1