Konica Minolta bizhub PRESS C71hc FD-9 Auto Scan Spectrophotometer User Guide - Page 8

Unpacking ❙❙Packing Materials: Keep all packing materials (cardboard box, cushioning materials, plastic bags, etc.) in a safe place. The FD-9 is a precision measuring instrument. In the event that the instrument needs to be shipped to a Konica Minolta authorized service facility, the packing materials can be used to protect the instrument from impact and vibration during shipment. If the original packing materials are lost or damaged, please contact the nearest Konica Minolta authorized service facility. ❙❙Removing Tapes: The cover, color measurement sensor unit, and conductive pads of the FD-9 have been taped in position to avoid movement during shipment. The tapes must be removed before use. After unpacking the FD-9 and placing it in its final location, remove the tape strips ① and ② as indicated in the illustrations below. Open the cover and remove tape ③ as shown at right. If power is switched on before tape ③ is removed, the FD-9 may malfunction. After removing tape ③, slide the color measurement sensor unit slightly by hand to check that it moves smoothly. If it does not move smoothly or if there is excessive noise, please contact your local Konica Minolta dealer. Carefully remove the tapes ④ as shown in the figure below. Be careful not to remove the conductive pads under the tapes. If tapes ④ are not removed, repeatability may suffer. 6