Konica Minolta bizhub PRESS C71hc FD-9 Auto Scan Spectrophotometer User Guide - Page 18
Connecting the AC adapter
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Preparations ❙❙Connecting the AC adapter Warning • Always use the AC adapter supplied as a standard accessory or a specified replacement AC adapter, and use the AC adapter only with an AC outlet of the rated voltage and frequency. Failure to do so may damage the FD-9 or AC adapter, or may cause electric shock or fire. • If the FD-9 will not be used for a long period of time, disconnect the AC adapter from the AC outlet. • When plugging the AC adapter into an AC outlet, be sure that the prongs of the plug are clean and dry. Accumulated dirt or moisture on the prongs of the plug may cause a fire and should be removed. • When plugging in or unplugging a cord, be sure to hold the plug, not the cord. Do not pull on or forcibly bend the cord. Doing so may result in broken wires. • Do not plug in or unplug the AC adapter with wet hands. Doing so may cause electric shock. • Be sure to insert plugs fully and securely. Incomplete insertion may cause fire or electric shock. • Do not disassemble or modify the AC adapter or cords. Doing so may cause fire or electric shock. • Do not unplug or plug in the AC adapter with the instrument's power set to "ON" ( | ) Doing so may cause a malfunction. Procedure 1 Make sure that the power switch of the FD-9 is set to off (). 2 Insert the output plug of the AC adapter power cord into the power cord inlet of the AC adapter as shown. 3 Insert the output plug of the AC adapter into the AC adapter inlet of the FD-9 as shown. Be sure the plug is oriented correctly. 4 Insert the input plug of the AC adapter power cord into an AC wall outlet. • When disconnecting the AC adapter, make sure that the power switch is set to off (). 16