Konica Minolta bizhub PRESS C71hc FD-9 Auto Scan Spectrophotometer User Guide - Page 35

Specifications Model Illumination/ viewing system FD-9 45°a:0° (annular illumination) *1 Conforms to CIE No. 15, ISO 7724/1, DIN5033 Teil 7, ASTM E 1164, and JIS Z 8722 Condition a for reflectance measurements. Spectral separation device Concave grating Wavelength range 380 to 730 nm Wavelength pitch 10 nm Half bandwidth Approx. 10 nm Measurement area Approx. Ø3 mm Measurement light source LED Measurement range Reflectance: 0 to 150% Short-term repeatability Colorimetric: Within σΔE00 0.05 (Under Konica Minolta test conditions where a white calibration plate is measured 30 times at 10-second intervals after white calibration has been performed.) Inter-instrument agreement Within ΔE00 0.3 (Average of 12 BCRA Series II color tiles compared to values measured with a master body under Konica Minolta standard conditions.) Measurement time Approx. 4 min. for 1500 patches (According to Konica Minolta standard conditions)*3 Measureable charts Paper width 45 to 330 mm Paper length 170 to 660 mm Paper thickness 0.05 to 0.45 mm Minimum patch size 6 × 6 mm Maximum number of patches per sheet of paper A4-sized paper: 1394 A3-sized paper: 2928 Output item Illumination conditions *2 Spectral reflectance M0 (A), M1 (D50), M2 (A+UV filter), C, ID50, D65, ID65, F2, F6, F7, F8, F9, F10, F11, F12, User-defined illuminant Backing condition White backing, compliant with ISO 13655 Interface USB2.0; 100Base-TX Power Dedicated AC adapter: Input: AC 100 to 240 V 50/60 Hz Output: DC 24 V 5 A Dimensions (W × D × H) Main body only: 716 × 251 × 159 mm Auto Sheet Feeder FD-A09 (optional accessory) only: 601 × 1158 (with trays extended) × 245 mm Weight Main body only: Approx. 10.5 kg Operating temperature/ humidity range 10 to 35°C, 30 to 85% relative humidity with no condensation Storage temperature/ humidity range 0 to 45°C, 0 to 85% relative humidity with no condensation Standard accessories AC adapter, USB cable, Measurement Utility Software FD-S2w, Paper Guide Optional accessories Auto Sheet Feeder FD-A09 *1 Illumination for wavelengths below 400 nm is unidirectional. *2 M0, M1, and M2 illumination conditions conform to the illumination conditions in ISO 13655 Section 4.2.2 Illumination requirements and measurement conditions. *3 Paper size: A3; Patch size: 6 × 6 mm; Patch distribution: 47 rows × 32 columns 33