Konica Minolta bizhub PRO 1100 bizhub PRO 1100 Daily Maintenance Guide
Konica Minolta bizhub PRO 1100 Manual
View all Konica Minolta bizhub PRO 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta bizhub PRO 1100 manual content summary:
- Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 1
- Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 2
Notations and symbols used in this manual CAUTION This symbol indicates that negligence of the instructions may lead to mishandling that Guide. This guide describes product names and system configurations as follows. Product name bizhub PRO 1100 Microsoft Windows Conventions used in this guide - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 3
bizhub PRO 1100 Intended use of this machine Intended use This machine is designed to been trained by Konica Minolta or authorized partner to operate the system for its intended use as well as manage consumables, and perform the maintenance and troubleshooting described in user's guides. Everyone who - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 4
Contents Intended use of this machine i Intended use i Impermissible operating conditions i Exclusion of liability i Target groups i Contents ii 1 Daily Care 1.1 Daily cleaning 1-1 About daily cleaning 1-1 Cleaning timing 1-1 Items necessary for cleaning 1-1 Scan section 1-2 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 5
bizhub PRO 1100 Making the Both Sides Adjustment for each tray 2-22 Scan Measurement Adjustment 2-22 Gap Adjustment 2-31 Chart Adjustment 2-35 Zoom and Image Shift Adjustment 2-41 iii - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 6
1 Daily Care 1.1 Daily cleaning About daily cleaning To reproduce stable output by this machine, be sure to clean the machine before output. )Cleaning timing Check the cleaning section every day before you activate the power of the machine. Clean the cleaning section when the cleaning section is - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 7
glass - Slit scan glass for back side NOTICE - Be careful not to damage the glass when you clean the machine. )Cleaning procedure 1 Open the ADF. bizhub PRO 1100 2 Clean the dirt on the original glass with a cleaning pad. 1 3 Clean the dirt on the slit scan glass with a cleaning pad. 1-2 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 8
4 Open the lever [DF1], then open the conveyance guide. 5 Clean the dirt on the slit scan glass for back side with a cleaning pad. 6 Press the label section, and close the conveyance guide. 7 Close the ADF. 1-3 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 9
bizhub PRO 1100 Fusing section CAUTION Be sure to check the cleaning section possibly get burned when you clean near the fusing unit. )Cleaning section of the fusing section - Pre-fusing guide plate - Fusing separating claw/Lw - Fusing separating claw/Up NOTICE - Be careful not to drop any dirt - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 10
[M4], and pull out the duplex section. 5 Deactivate the sub power switch, then deactivate the main power switch. 6 Clean the dirt on the pre-fusing guide plate with a cleaning pad. 7 Hold the lever [M8], and open the reverse exit section. 8 Hold the lever [M9], and open the fusing paper exit section - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 11
9 Moisten the cleaning pad with isopropyl alcohol, and clean the dirt on the fusing separating claw/Lw. bizhub PRO 1100 10 Moisten the cleaning pad with isopropyl alcohol, and clean the dirt on the fusing separating claw/Up. 11 Close the fusing paper exit section, - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 12
sub power switch, then deactivate the main power switch. 4 Close the left door and right door of the main body. 5 Clean the dirt of the toner inside the tray 1 with a cleaning pad. 6 Move the tray 1 to the initial position. 1-7 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 13
. Clean the cleaning section when the cleaning section is dirty. Cleaning section Scan section Fusing section Duplex section Reverse exit section Paper feed section bizhub PRO 1100 Reference P.1-9 P.1-11 P.1-14 P.1-19 P.1-21 )Items necessary for cleaning - Isopropyl alcohol - Cleaning pad 1 1-8 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 14
Scan section )Cleaning section of the scan section - Original glass - Slit scan glass - Slit scan glass for back side NOTICE - Be careful not to damage the glass when you clean the machine. )Cleaning procedure 1 Open the ADF. 2 Clean the dirt on the original glass with a cleaning pad. 3 Clean the - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 15
4 Open the lever [DF1], then open the conveyance guide. 5 Clean the dirt on the slit scan glass for back side with a cleaning pad. 6 Press the label section, and close the conveyance guide. 7 Close the ADF. bizhub PRO 1100 1 1-10 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 16
the fusing unit becomes hot. Therefore, you possibly get burned when you clean near the fusing unit. )Cleaning section of the fusing section - Pre-fusing guide plate - Fusing separating claw/Lw - Fusing separating claw/Up NOTICE - Be careful not to drop any dirt on the paper path when you clean the - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 17
4 Hold the lever [M4], and pull out the duplex section. bizhub PRO 1100 5 Deactivate the sub power switch, then deactivate the main power switch. 6 Clean the dirt on the pre-fusing guide plate with a cleaning pad. 7 Hold the lever [M8], and open the reverse exit section. 1 8 Hold the lever [M9], - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 18
9 Moisten the cleaning pad with isopropyl alcohol, and clean the dirt on the fusing separating claw/Lw. 10 Moisten the cleaning pad with isopropyl alcohol, and clean the dirt on the fusing separating claw/Up. 11 Close the fusing paper exit section, and move the reverse exit section to the initial - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 19
clean the machine. )Cleaning procedure 1 Pull the handle in the arrow-marked di- rection and remove the paper fur brush for the registration roller/Lw. bizhub PRO 1100 1 2 Remove the paper dust which adheres to the paper fur brush for the registration roller/Lw with a cleaning pad. 1-14 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 20
3 Move the paper fur brush for the registration roller/Lw to the initial position. NOTICE When you move the paper fur brush for the registration roller/Lw to the initial position, be sure to insert it fully until it hits against the back. 4 Remove 3 paper fur brushes for the registration roller/Up - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 21
6 Move 3 paper fur brushes for the registration roller/Up to the initial position. bizhub PRO 1100 NOTICE - When you move 3 paper fur brushes for the registration roller/Up to the initial position, confirm that 2 projections for each are fitted to the - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 22
8 Moisten the cleaning pad with isopropyl alcohol, and clean the dirt on the entrance section of the duplex section. 9 Close the lever [M1]. 10 Open the lever [M12]. 11 Moisten the cleaning pad with isopropyl alcohol, and remove the dirt, pieces of paper, and paper dust on the entrance section of - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 23
14 Moisten the cleaning pad with isopropyl alcohol, and clean the dirt on the registration roller. 15 Moisten the cleaning pad with isopropyl alcohol, and clean the dirt inside the registration unit. 16 Close the lever [M3]. bizhub PRO 1100 1 1-18 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 24
Reverse exit section CAUTION Be sure to check the cleaning section before you activate the power of the main body. If you activate the power with the door of the main body closed, the inside of the fusing unit becomes hot. Therefore, you possibly get burned when you clean near the fusing unit. ) - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 25
roller. 4 Close the lever [M7]. 5 Moisten the cleaning pad with isopropyl alcohol, and clean the dirt on the opposed roller of the fusing exit roller. bizhub PRO 1100 1 6 Push the duplex section into the main body, and move the lever [M4] to the initial po- sition. 1-20 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 26
sub power switch, then deactivate the main power switch. 4 Close the left door and right door of the main body. 5 Clean the dirt of the toner inside the tray 1 with a cleaning pad. 6 Move the tray 1 to the initial position. 1-21 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 27
bizhub PRO 1100 2 BOTH SIDES ADJUSTMENT Both Sides Adjustment When performing the Adjustment: entering from [Paper Setting] and from [Both Sides] on the [MACHINE] screen. This guide describes how to enter from [Paper Setting] for adjustment. Reference For information about how to enter from - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 28
of marks. For details, refer to the HTML User's Guide. NOTICE A high technical skill is required to adjust the reference position on the print side. Before carrying out this adjustment, contact your service representative. You can change the default screen of the [Both Sides Adjust] screen. For more - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 29
Adjustment (Side 2) (Page 2-18) - Centering Adjustment (Page 2-20) bizhub PRO 1100 )Placing paper (Main body) The same paper loading procedure is used for the side guide plates and rear guide plate apart. - While pressing the side guide lock release lever of the side guide, fully open the plates - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 30
paper. NOTICE Do not load paper over the limit level indicated on the side guide plate of the tray. Securely press the side guide plates and rear guide plate against the paper. Otherwise, the machine will not be able to detect due to the tray or paper weight, which may lead to a machine error. 2-4 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 31
bizhub PRO 1100 )Placing paper (Paper Feed Unit PF-709) The following describes Reference For information about how to load paper into other optional paper feeder unit, refer to the HTML User's Guide. 1 Pull out the tray to load paper into. NOTICE Trays cannot be withdrawn when the machine is powered - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 32
small size guides, refer to the HTML User's Guide. Be sure that the rear guide plate is securely pressed against the paper. If there is any gap between the rear guide plate and the paper, this machine will not be able to detect the correct paper size. It may cause a paper feeder machine trouble. 2-6 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 33
bizhub PRO 1100 7 Close the feed roller, then close the tray. Push the tray in until it locks into place. The amount indicator changes from to [MACHINE tray. Otherwise, the machine may be subjected to an unexpected impact due to the tray or paper weight, which may lead to a machine error. 2 2-7 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 34
)FD-Mag. Adjustment (Side 1) Adjust the magnification in paper feed direction in the printer engine. This adjustment value will be the standard for Both Sides Adjust in Paper Setting. Objects of adjustment: Printer FD-Mag. NOTICE The adjustment of [Printer FD-Mag.] is applied to both the front and - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 35
7 Measure the resultant magnification in the paper feed direction. Allowance: r 0.5% or less (full size) Within 205.7 mm r 1 mm bizhub PRO 1100 205.7 8 If any adjustment is required, press [Exit PrintMode] to return to the [FD-Mag. Adjustment] screen. 9 Use the touch panel keypad or the keypad - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 36
)CD-Mag. Adjustment (Side 1) Adjust the magnification in crosswise direction in the printer engine. Objects of adjustment: Printer CD-Magnification Adjustment 1 Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen. 2 Press [Machine Adjustment], [Printer Adjustment], and - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 37
bizhub PRO 1100 8 If any adjustment is required, press [Exit PrintMode] to return to the [CD-Mag. Adjustment] screen. 9 Use the touch panel keypad or the keypad on - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 38
)Restart Timing Adjustment (Side 1) Adjust the image position of lead edge in paper feed direction in the printer engine. Objects of adjustment: All Trays Offset, Restart Timing (Tray 1 to Tray 5), Restart Timing (Bypass) NOTICE Make this adjustment after completing [FD-Mag. Adjustment]. The - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 39
7 Measure the resultant restart timing. Allowance: 20 mm r 0.5 mm / 0.79" r 0.02" 20 bizhub PRO 1100 8 If any adjustment is required, press [Exit PrintMode] to return to the [Restart Timing Adjustment] screen. 9 Use the touch panel keypad or the keypad on - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 40
)FD-Mag. Adjustment (Side 2) Adjust the magnification in paper feed direction in the printer engine. This adjustment value will be the standard for Both Sides Adjust in Paper Setting. Objects of adjustment: Tray 1 to Tray 5, Bypass Tray 1 Press [Adjustment] on the [MACHINE] screen to display the [ - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 41
bizhub PRO 1100 8 If any adjustment is required, press [Exit PrintMode] to return to the [FD-Mag. Adjustment] screen. 9 Use the touch panel keypad or the keypad on - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 42
)CD-Mag. Adjustment (Side 2) Adjust the magnification in crosswise direction in the printer engine. Objects of adjustment: Printer CD-Magnification Adjustment 1 Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen. 2 Press [Machine Adjustment], [Printer Adjustment], and - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 43
bizhub PRO 1100 8 If any adjustment is required, press [Exit PrintMode] to return to the [CD-Mag. Adjustment] screen. 9 Use the touch panel keypad or the keypad on - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 44
)Restart Timing Adjustment (Side 2) Adjust the image position of lead edge in paper feed direction in the printer engine. Objects of adjustment: Restart Timing (Tray 1 to Tray 5), Restart Timing (Bypass) 1 Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen. 2 Press [ - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 45
bizhub PRO 1100 8 If any adjustment is required, press [Exit PrintMode] to return to the [Restart Timing Adjustment] screen. 9 Use the touch panel keypad or the keypad on - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 46
)Centering Adjustment Adjust the image position in the crosswise direction of the printer engine. NOTICE Make this adjustment after completing [CD-Mag. Adjustment]. 1 Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen. 2 Press [Machine Adjustment], [Printer Adjustment - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 47
bizhub PRO 1100 8 Use the touch panel keypad or the keypad on the control panel to enter the setting data. - Use [+/-] to specify the value to be positive - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 48
Making the Both Sides Adjustment for each tray Adjust a misalignment between the front and back sides, which is caused during the duplex printing, for each tray. The following methods are available to carry out the Both Sides Adjustment. - Scan Measurement Adjustment (Page 2-22) - Gap Adjustment ( - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 49
2 Select the tray with the target paper loaded, then press [Change Set]. 3 Press [Both Sides Adj]. bizhub PRO 1100 4 Check that [Scan Meas.] is displayed, then press [Output Background Sheet]. 2 2-23 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 50
5 When the [PRINT MODE] screen is displayed, press Start on the control panel. A background sheet is printed out. If you already have the background sheet available for measurement, you do not need to print out a background sheet. Proceed to Step 7. NOTICE Use paper of A3 or larger, or 11 e 17 or - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 51
paper in the tray you selected in Step 2. 10 Press [Exit Print Mode]. 11 Press [2. Scan Adjustment Chart]. The [Scan Adjustment Chart] screen is displayed. bizhub PRO 1100 2 12 Place an adjustment chart on the original glass. 2-25 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 52
with the far end of the glass. Place the upper-left corner of the adjustment chart approximately 2 inches (approximately 5 cm) away from the vertical size guide and horizontal size guide respectively on the original glass making sure that the left and top sides are parallel to the vertical size - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 53
bizhub PRO 1100 13 Place the background sheet on the original glass, then close the ADF. Place the black side of the background sheet facing down (facing the original glass), then set it flush with the vertical size guide and horizontal size guide as shown below. Exercise care to ensure the - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 54
15 Repeat the scanning steps 12 to 14 four times for every adjustment chart. - First time: Set the front side of the adjustment chart face up (turned away from the original glass), with its top edge positioned to the back side. - Second time: Set the front side of the adjustment chart face up ( - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 55
After the adjustment is completed, press [OK]. To finely adjust the adjustment value, continuously proceed to step 4 in "Zoom and Image Shift Adjustment" (Page 2-41). bizhub PRO 1100 2 2-29 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 56
18 Press [Close] to exit the adjustment. Scan Measurement Adjustment is then completed. - To register adjustment values in a paper profile, press [Register]. - For details about how to register a paper profile, refer to the HTML User's Guide. 2-30 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 57
bizhub PRO 1100 )Gap Adjustment To adjust a gap, print out a chart, measure a gap between the front and back sides at the specified measurement point of the back side - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 58
4 Select [Gap], then press [Print Mode]. 5 When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed out. 6 Press [Exit Print Mode]. 7 Measure the gap between the front and back sides at each point of [a] to [d] on the [back] side of the printed out - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 59
value, press [Clear]. - To switch the positive sign (+) and negative sign (-), press [+/-]. 9 When entry processing is completed, press [Adjustment Start]. bizhub PRO 1100 10 Press Start on the control panel. A test chart is printed out. 2 11 Check a gap of the printing position refering the - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 60
is then completed. - To register adjustment values in a paper profile, press [Register]. - For details about how to register a paper profile, refer to the HTML User's Guide. 2-34 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 61
bizhub PRO 1100 )Chart Adjustment You can print out a Both Sides Adjustment chart, measure measurement points using a scale, and enter measurement values in order to carry out the - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 62
4 Select [Front], then press [Chart Adjustment]. 5 Press [Print Mode]. 6 When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed out. 7 Press [Exit Print Mode]. 2-36 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 63
bizhub PRO 1100 8 Measure the line length at each of points [1] to [8] on the printed-out chart using a scale. - The figure on the right illustrates an example to - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 64
11 Select [Back], then press [Chart Adjustment]. 12 Press [Print Mode]. 13 When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed out. 14 Press [Exit Print Mode]. 2-38 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 65
a negative value (-). - To reset a value, press [Clear]. - To switch the positive sign (+) and negative sign (-), press [+/-]. 17 When entry processing is completed, press [Adjustment Start]. bizhub PRO 1100 back 2 2-39 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 66
is then completed. - To register adjustment values in a paper profile, press [Register]. - For details about how to register a paper profile, refer to the HTML User's Guide. 2-40 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 67
bizhub PRO 1100 )Zoom and Image Shift Adjustment You can finely adjust the zoom ratio of the print side and the top, bottom, left, and right positions on - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 68
4 Press [Front] or [Back] to select the print side to be adjusted. 5 Enter the zoom ratio or the image shift value using the keypad, [,], or [+] on the screen or the Keypad on the control panel. - To specify the zoom ratio, press [Vertical] or [Horizontal], then enter a value. [Vertical] is used to - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 69
is then completed. - To register adjustment values in a paper profile, press [Register]. - For details about how to register a paper profile, refer to the HTML User's Guide. bizhub PRO 1100 2 2-43 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 70
Tips If printing positions are misaligned between the front and back sides even after the Both Sides Adjustment has been carried out several times, readjust the reference position on the print side. For details about the adjustment procedure, refer to the HTML User's Guide. 2-44 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Daily Maintenance Guide - Page 71
© 2016 2016.03