Konica Minolta bizhub PRO 1100 bizhub PRO 1100 Daily Maintenance Guide - Page 63
on the screen.
View all Konica Minolta bizhub PRO 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
bizhub PRO 1100 8 Measure the line length at each of points [1] to [8] on the printed-out chart using a scale. - The figure on the right illustrates an example to measure points [1] and [5]. As illustrated in this example, measure the line length at [5] [1] each printed point. - The measurement value can be entered in units of up to 0.1 mm. - Write down the measured lengths so that you do not forget them. [5] [7] [1] [2] [6] [8] [3] [4] 9 Press each point number, then enter the measured length using the keypad, [,], or [+] on the screen. - To reset a value, press [Clear]. 2 10 When entry processing is completed, press [Adjustment Start]. In the next step, adjust the back side. 2-37
2-37
bizhub PRO 1100
2
8
Measure the line length at each of
points [1] to [8] on the printed-out chart
using a scale.
-
The figure on the right illustrates an example
to measure points [1] and [5]. As illustrated
in this example, measure the line length at
each printed point.
-
The measurement value can be entered in
units of up to 0.1 mm.
-
Write down the measured lengths so that
you do not forget them.
9
Press each point number, then enter the
measured length using the keypad, [
,
],
or [
+
] on the screen.
-
To reset a value, press [Clear].
10
When entry processing is completed,
press [Adjustment Start].
In the next step, adjust the back side.
[1]
]
7
[
]
5
[
]
8
[
]
6
[
[2]
]
4
[
]
3
[
[1]
[5]