Konica Minolta bizhub PRO 1100 bizhub PRO 1100 Daily Maintenance Guide - Page 46

Adjustment], and [Centering Adjustment]

Get Konica Minolta bizhub PRO 1100 PDF manuals and user guides View all Konica Minolta bizhub PRO 1100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

)Centering Adjustment Adjust the image position in the crosswise direction of the printer engine. NOTICE Make this adjustment after completing [CD-Mag. Adjustment]. 1 Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen. 2 Press [Machine Adjustment], [Printer Adjustment], and [Centering Adjustment] in sequence. 3 Press [Print Mode]. 4 Load A3 w paper or 11 e 17 w paper into any tray, then select that tray. 5 Press Start on the control panel. A sample pattern will be output. - On the front side of the chart, the chart. mark will be printed so that you can tell which tray is used to print 6 Fold the printed paper at the center in the crosswise direction, and check the misalignment of the center line of the print from the folded line. Allowance: within 0 mm r 1.5 mm 7 If any adjustment is required, press [Exit PrintMode] to return to the [Centering Adjustment] screen. 2-20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
2-20
)
Centering Adjustment
Adjust the image position in the crosswise direction of the printer engine.
NOTICE
Make this adjustment after completing [CD-Mag. Adjustment].
1
Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu]
screen.
2
Press [Machine Adjustment], [Printer
Adjustment], and [Centering Adjustment]
in sequence.
3
Press [Print Mode].
4
Load A3
w
paper or 11
e
17
w
paper into any tray, then select that tray.
5
Press
Start
on the
control panel
.
A sample pattern will be output.
-
On the front side of the chart,
mark will be printed so that you can tell which tray is used to print
the chart.
6
Fold the printed paper at the center in the crosswise direction, and check the
misalignment of the center line of the print from the folded line.
Allowance: within 0 mm
r
1.5 mm
7
If any adjustment is required, press [Exit PrintMode] to return to the [Centering
Adjustment] screen.