Konica Minolta bizhub PRO 1100 bizhub PRO 1100 Daily Maintenance Guide - Page 69
Zoom and Image Shift Adjustment is then
View all Konica Minolta bizhub PRO 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Zoom ratio adjustment example: The image on the front side is 10 mm in a lengthwise direction while the image on the back side has been lengthened to 10.1 mm. - Press [Vertical] of [Back], then press [1][0][0]. - Then, press [+/-] to change the mark to set the adjustment value to [-1.00]. The image on the back side is reduced by 1%. In this figure, the black mark front side and the blue mark back side. indicates the indicates the Image shift adjustment example: The image on the back side is misaligned 0.5 mm downward and 0.3 mm - Press [Up/Down] of [Back], then press [5] to set the adjustment value to [+0.5 mm]. - Next, press [Right/Left], then press [3] and [+/-] in sequence to set the adjustment value to [-0.3 mm]. The image on the back side shifts 0.5 mm upward and 0.3 mm leftward. 6 After the adjustment is completed, press [OK]. 7 Press [Close] to exit the adjustment. Zoom and Image Shift Adjustment is then completed. - To register adjustment values in a paper profile, press [Register]. - For details about how to register a paper profile, refer to the HTML User's Guide. bizhub PRO 1100 2 2-43